This is a holder for 5 USB Sticks that bolts to the side of a Voxelab Proxima 6 with the existing screws.

Proxima_stick_hdr.STL

This a holder that is designed to hold a gait belt for storage on a walker or wheelchair. A gait belt is used to help stand a disabled person. This design is meant to be printed in TPU. It mounts by clipping around the frame of the walker or wheelchair. It is then fasten using two Ty-Wraps to close the clips around the frame pipe.

Gait Belt holder for walker or wheelchair

This a Amazon Fire 8 Tablet arthritis support Aid. It is meant to help those of us with old broken hands to hold this thin tablet with less stress on our hands. It is designed to allow right hand or left hand use. There a large thumb rest which along with a finger ridge on the bottom to help support the tablet without applying a tight grip. The design is in two pieces with the main part being the case that surrounds the tablet with the second part being an end cap to hold everything together. Two #4 sheet metal screws are used to fasten the end cap.

Amazon Fire 8 Tablet arthritis support Aid

Tablet_grip8.STL

This a Amazon Fire 7 Tablet arthritis support Aid. It is meant to help those of us with old broken hands to hold this thin tablet with less stress on our hands. It is designed to allow right hand or left hand use. There a large thumb rest which along with a finger ridge on the bottom to help support the tablet without applying a tight grip. The design is in two pieces with the main part being the case that surrounds the tablet with the second part being an end cap to hold everything together. Two #4 sheet metal screws are used to fasten the end cap.

Amazon Fire 7 Tablet arthritis support Aid

tablet_grip_7.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5033609.

This a reel for holding your scraps of filament that were to good to toss. One end of the reel is a twist lock for easy loading and unloading.

Filament scrap reel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4555637.

This design was done to ease access to controls and display.  It also aids if you desire to move controls outside of an enclosure.  I found the angle of the display very bad for me with my bifocals and the micro SD card slot damn near impossible for me to get the card in. So I designed myself  a housing to hold the control panel and a Full size SD card socket to micro adapter. It has made a world of difference for me.
I have included a doc file with hyperlinks to the SD card cable and a long control cable.
I also have included the STEP files for the design, in case you desire to make changes.

Ender 3 control enclosure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5232610.

This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front  control panel, Raspberry PI 4 and a buck converter to power Raspberry PI.  Included in the files is a doc that lists many helpful items to perform the relocation of the electronics. All parts were printed using PLA from various vendors.
I have added 2 files to support the original Ender 3 Power Supply.


Ender 3, Ender 3 Pro Electronics Enclosure (Updated)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5021519.

This design is for a head support for a device known as a lift chair. This chair is used to lift people who have fallen and don't have the strength to stand up. The chair itself was designed    by a company known as Liftup in Denmark. The model this was designed for is the older Raizer. The newer model is the Raizer II. I have not tried it, but it may also fit ok on the Raizer II. I made it in 3 sections, so it could be printed on an Ender 3 style printer. I used Gorilla Glue to glue the sections together. The lower back needs to also be screwed to the mid back along the joint with 7 number 4 sheet metal screws, as this a high stress area. 

Liftup Corp Raizer liftchair head support.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4777791.

Have some fun with your ECHO 1 and turn it into a snack bowel. Bowl is designed to hold an ECHO 1 in the center. The ECHO actually helps hold the bowl still while greedy fingers grab snacks. Bowl has a channel in the bottom to run the power cord.
 Print was done with walls set to 99 and infill set to zero.

Amazon Echo 1 snack bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5177533.

This is a number of piece parts needed to create a frame stiffener for  a customized Ender 3 type printer. This design was done for a printer with 800mm vertical frame pieces. If you want to use this on a different vertical height, then you have to adjust the angle of the top and bottom support pieces. So I have included the STEP files if you have the skill to change this. It does require the use of some High School math to get the correct angle. I used 1/4x20 threaded drill rod. This worked pretty good with the rod stiffeners, I used 3 stiffeners on each side. These were epoxied together and held in place with a 1/4x20 nut at each end. I have included photos of the details were nuts go and frame attachment. References to Left and right are from the back of the printer.

DIY Frame stiffener for custom Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4859780.

This design will create more room on your bench top. It combines a tool holder, a SD card adapter and relocates the control panel to be closer to the center line of the printer. The tool holder, can hold all the tools that come with the Aquila, plus a pair of angle cutters along with 2 SD cards and 2 micro SD cards. This design was created as two pieces to make it easier to print. The pieces can be joined by epoxy or two #4 sheet metal screws.  Use the original screws that mounted the control panel mount to the printer, to mount the tool holder to the printer. The SD card adapter is a LANMU Micro SD to SD Card Extension Cable Adapter from Amazon.  https://www.amazon.com/gp/product/B085HLSD6P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Voxelab Aquila control panel mount and toolbox.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5219767.

This a Large cup holder for a tray that attaches to a tray on a walker. The holder easily holds 12oz glasses and coffee mugs. It attaches quickly with a large nut.
The holder itself, is printed using a TPU filament. You could try PETG or ABS but it maybe to rigid to work well. I don't think PLA would be a good choice, unless you can get FPLA+ which is available on Amazon.
I printed the nut in PLA and the combo is great, and the nut tightens well against the TPU.

Walker Tray Large Cup Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5174564.

A wall mount pug face with a hook tongue, that can be used to hang a dog leash or a light jacket. There are two pieces, the face and a backing to add contrast. I used epoxy to join the two pieces. I also used the fuzzy option in Cura to add texture to the face.

Pug leash hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4571860.

This is a fix for the Ender 3 printer. The opening in the sheetmetal for the micro sd socket is too large and it is very easy to loose your micro sd card inside the unit. This a very easy quick fix.  Print, insert and your done.

Ender 3 micro sd fix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4777856.

I am not sure if everyone is bothered by this. But when loading filament to the extruder, I often find the filament gets as far as the fitting on the Bowden tube and gets caught on the face of the fitting. Cutting the filament to a taper does help some but, I needed more. So I designed this fitting to go between the extruder and the Bowden tube fitting. It has a flare on the extruder side that guides the filament to a 2mm hole inline with the tube.
I printed with walls set to 99 and infill to zero.  Depending on how well this prints for you, you will likely have to run  a 2mm or 5/64 drill through the hole to get the correct size. The threads  will also likely need the attention of an Xacto knife. 

Extruder filament alignment segment

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4862712.

This is a filament feed pulley system for the Voxelab Aquila 3D printer. The brass feed hole in the extruder will become worn from the filament without something  like this. There are other designs out there, but they all require a ball bearing. My feeling is this is overkill. My design uses no bearing and all you need is your printer to create it. The tolerances are very sloppy and the pulley moves freely. Wear is not a problem as the movement is very slow. The bracket mounts in the existing holes on the extruder bracket with two M3 screws.

Voxelab Aquila Filament Feed Pulley, no bearing needed.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5270710.

This is an under shelf plier and vernier caliper dock. It has 8 separate plier docking locations with the functional end pointed out so you always grab the right tool. There are a set of loops on the left side which will hold a vernier caliper. Prints well in PLA and PETG. Make sure you set attachment type to be none as the width maxs out the dimensions of an Ender 3 type build plate at 218 mm.

Under Shelf Plier Dock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4767263.

This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to 0. This will give you a solid part. I also used PETG for maximum strength.

AMD CPU Heatsink retention bracket, socket AM2 AM2+ AM3 AM3+ FM1 FM2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5228118.

This design is for a glass shelf bracket that accepts a 3/16 inch (5mm) sheet of glass. I printed these using Cura and chose the Fuzzy finish. I think it really makes them look metal.

Glass Shelf brackets for 3/16 inch (5mm) glass

Does your Dot fight with a snack bowel on your end table? Combine the two. This snack bowel will hold your favorite snacks and your Dot. Bowel should work for all Dots 1-4. Center of bowel can act as sound chamber and can be tuned with an adjustable slot lid that fits under the Echo.
Print was done with walls set to 99 and infill set to 0. I would recommend supports set to tree.

echo_dot_bowel.STL

use to cover slots in bowel and tune sound chamber.

dot_slot.STL

Echo Dot wall holder. Holds Dot 1, Dot 2 and Dot 3. Attaches to wall with one screw.

wall_echo_hdr.STL

This is a holder for 7 bottles of Testors model paint. It is designed to mount under a shelf or desk top. Each slot has little ski tips on them to help hold the bottles in.



paint rack.STL

This is a artist paint pen holder that holds 46 pens. It holds 31 0.7mm pens and 15 medium pens. It mounts under a shelf or cabinet. It also can be used on the desktop.

Art_paint_pen_holder

2oz_paint_holder_rect.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

peterz