A modular toilet paper snail for your bathroom wall. You can add as many modules as you want to store your toilet paper rolls in a comfortable and aesthetic way.

Instructions

1. Print the head, tail, and holder
2. Print as many modules and hooks as you want (4-8 recommended)
3. Connect the modules with the hooks
4. You can either screw or glue the holder onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Diameter of the two screw holes: 5,5mm
5. Insert the snail onto the holder
6. Don’t forget to add the toilet paper rolls from top to bottom and remove them from bottom to top – to preserve the balance in the construction!

Print settings Required build volume: 160 x 160 x 160 mm Material usage overall with 4 modules: 200g Print time with 4 modules: 17h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none