A highly detailed tree trunk pencil holder based on a 3d scan of a fallen beech with tinder mushrooms. Tree: Fagus Sylvatica Mushrooms: Fomes Fomentarius

The pencil compartment holds about 5-8 pencils, and the design has a extra tray for small accessories like an eraser or sharpener.

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

• Option 1: Print everything in one go
• Option 2: Print the trunk sliced up to reduce potential purge waste. When your print is done, insert the small connectors into the holes and glue the segments together. Between segment 1 and 2 there is a rim where you will later open the base – so make sure to not glue those two parts together. Segment 2 prints upside down! It is already rotated correctly in all files. This way no support is needed.

Size assembled: 130 x 131 x 191 mm If you want it to be a little bigger you can scale all the parts up by yourself.

Print settings Required build volume: 140 x 140 x 140 mm

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none