NOTE: Any updates will be posted on printables: https://www.printables.com/model/800559-glinet-beryl-ax-gl-mt3000-travel-router-mount
This is a mounting bracket for a GL.iNet Beryl AX Wifi 6 GL-MT3000 travel router.
I needed a robust mounting bracket for this travel router to mount in our RV. I plan to merge this mount into a larger mounting bracket to hold a POE injector, USB-C adapter, and 12-56v transformer for running Starlink off-grid via DC and POE. But for now, I wanted to get the bracket tested in a simpler wall-mount print. The mount does provide clearance for air movement between the mount and the underside of the router. It also has a cutout to allow for some ventilation if you're mounting this on something other than a solid wall. I left the bottom of the bracket flat such that it'd mount directly to a wall, or you can easily merge this model with some other mounting plate (e.g., DIN, Skadis, HSW, etc.)
It prints really well in PETG. I added supports in the square openings and under the flatter overhang above them. It prints okay without those supports but looks better with them. The curved overhang did not require support in my testing. You can print with either two or three perimeters – I think three is a little stronger in high-flex areas, but it's plenty strong with two.
The four screw holes fit a #6 flat-headed screw or any countersunk screw roughly that size.