We needed a wall mount for some AirMAX LiteBeam 5ACs. Supports are required for the top portion. Printing the object with a 0.6mm nozzle is ideal, as the layer lines let the LiteBeam mount bite in nicely. A higher infill density is recommended for strength. PETG is highly recommended.
We have a dozen or so of these out in the field, one pair currently for three years, even surviving harsh winter and windy conditions. It should work with many pole mount devices that have enough clearance.
0 Likes0 DownloadsOctober 31, 2024
0 Likes0 DownloadsOctober 31, 2024
Instructions
Filament • 0.25mm
MaterialPETG
Layer height0.25 mm
Infill density25 %
SupportsGrid
BrimNo