tiny sea turtle

My absolute favorite animal! This sea turtle prints with its body and shell separate for fun color combos, and they snap together after printing. The 3MF files are pre-painted as seen in the photos. Prints in place with no support.

Files included:

• unibody STL (single part printing with separate shell)
• unibody 3MF (single part multicolor printing with separate shell)
• multipart STLs (separate part printing and assembly)
• multipart 3MF (multicolor separate part printing and assembly)

Print settings and recommendations:

• 3 walls at 0.4mm nozzle size
• 40-60mm/s outer wall speed recommended
• 15% infill (adaptive cubic, cross hatch, or gyroid)
• no supports, slow down for overhangs enabled
• no brim unless encountering adhesion issues
• PEZ / polyurea plate recommended
• 65% scale tested

Licensing: These model files are for your personal use only. Commercial licensing is available to sell physical prints of all tinymakery designs at patreon.com/tinymakery.