tracking pixel
tinymakery

tiny sea turtle

by
tinymakery
Follow
Follow
Remix Model
tinymakery
tinymakery
|
Image 1 of 4
tiny sea turtle 3d model
tinymakery
tinymakery
|
Image 1 of 4
tiny sea turtle 3d model
2D
3D
Makes
tiny sea turtle 3d model
tiny sea turtle 3d model
tiny sea turtle 3d model
tiny sea turtle 3d model
This model is restricted by licensing terms. 

My absolute favorite animal! This sea turtle prints with its body and shell separate for fun color combos, and they snap together after printing. The 3MF files are pre-painted as seen in the photos. Prints in place with no support.

Files included:

  • unibody STL (single part printing with separate shell)
  • unibody 3MF (single part multicolor printing with separate shell)
  • multipart STLs (separate part printing and assembly)
  • multipart 3MF (multicolor separate part printing and assembly)

Print settings and recommendations:

  • 3 walls at 0.4mm nozzle size
  • 40-60mm/s outer wall speed recommended
  • 15% infill (adaptive cubic, cross hatch, or gyroid)
  • no supports, slow down for overhangs enabled
  • no brim unless encountering adhesion issues
  • PEZ / polyurea plate recommended
  • 65% scale tested

Licensing: These model files are for your personal use only. Commercial licensing is available to sell physical prints of all tinymakery designs at patreon.com/tinymakery.


3 Likes0 DownloadsOctober 31, 2024


3 Likes0 DownloadsOctober 31, 2024
This model is restricted by licensing terms.