Simple GPU Holder for Multiboard with Tight Snap

A simple GPU Holder to put them on your multiboard, either for decorative purpose or to have it handy.

Tested so far with a Dual Slot GPU of 1Kg with dimension: 40.01 x 24.99 x 5.99 cm It should work with Tri Slot, heavier GPU but be SURE to test before

For printing, print on the side to get more strength (so the layers are vertical when the piece is fixed in place).

I used 25 % infill, 3 walls. You can use your slicer to cut it if your GPU is smaller.