Caliper holder for Adoric 6-inch / 150mm Calipers, Dual CR2032 batteries, Gridfinity 2x1 magnetic

Caliper holder for Adoric 6-inch / 150mm Digital Calipers IP54. Also holds two (2) spare CR2032 batteries for use with the calipers. Gridfinity 2x1 with magnetic base.

Details

These calipers cost less than $7 USD on Amazon. They are accurate, precise, feature auto on-off, and are very lightweight. I find myself using them more often than I thought I would, and I have a pair of Mitutoyos on my desk.

The fitment of the calipers in the holder is very good, not too tight, not too loose. They don't wobble when standing in the holder. The batteries also have excellent fit.

The magnet holes are left intentionally slightly loose to make gluing easier for the 6x2mm magnets and CA glue.

Printer and Slicer Settings

• Printer: Bambu Labs X1C
• Nozzle: 0.4mm
• Filament: Bambu PETG-CF filament
• Infill: 10% 3D Honeycomb

Files

Use the attached 3MF file to print the model. Use the attached F3D file to modify the model with Autodesk Fusion.