Henrik V
Henrik V

Deer Family - XMAS - 3D print STL and multicolor 3MF file

by
serev3d
serev3d
Follow
serev3d
serev3d
|
Image 1 of 4
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model
serev3d
serev3d
|
Image 1 of 4
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model
2D
3D
Makes
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model
Deer Family - XMAS - 3D print STL and multicolor 3MF file 3d model

Deer Family - XMAS - 3D print STL and multicolor 3MF file

-->Get access to all our other amazing 3d prints on our SEREV3d Patreon:
-dozens of original, high quality premium stl and 3mf files with provided print settings -painting and post processing recommendations -multiple different versions of the models, depending on your needs -and we also take personal requests from our members of what design they want!

-->Join our Serev3D Authorized Sellers List

More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/

For detailed printing & painting instructions, resources and extra info about this specific design: CLICK HERE

We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!

Also, a few good places where you can share your makes and get a good exposure:

Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d


PRINTING INSTRUCTIONS:

You can print not just one deer, but a full family of deers!:)

The papa and mama deer are print in place, NO supports needed!The baby deer since it's so tiny it's only a figurine version, but even with a very low layer height (0.12mm) it prints in about 1h20mVersions provided: 3 different deers, stl, multicolor 3mf, hollow eye & full eye version

Print difficulty level: Beginner to Intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

  • Layer height: 0.2mm (for baby deer 0.12mm recommended)

  • Wall loops: 3

  • Infill: in the range of 7-10%, Gyroid

  • Supports: No supports needed for papa and mama deer, for the baby deer you can activate auto tree supports, and it will make the tiniest supports in the world under the belly. It's still quite important, we tested and it works perfectly with the supports, (set TopZ distance to 0.2, BottomZ distance 0.2)


3 Likes2 DownloadsDecember 4, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %