Become a member on our Patreon and get access to DOZENS of awesome stl and 3mf files from our Serev3D library every month, for only 13$ (That's roughly 50 cents per file!)
More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/
For detailed printing & painting instructions, resources and extra info about this specific design: CLICK HERE
We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!
Also, a few good places where you can share your makes and get a good exposure:
Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d
- New models being released every 2-3 days
- If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List
PRINTING INSTRUCTIONS: We provided a few different versions of this cute design, you can find it in full one piece version, in 2 parts which is for the movable head version, and a MultiColor version too.
Recommended print settings: (If you use Bambu or Orca slicer, you can load the 3mf project files with the recommended slicing settings. (If you're used to other settings with your machine, feel free to adjust the settings)
If you use other slicers here's the recommended settings:
- Layer Height: 0.2mm or 0.16mm if you want finer details.
- Infill: 10%
- Infill pattern: Gyroid
- Wall loops: 2 (if you want it stronger set it to 3)
Supports: manual tree(organic) supports, you can follow the support painting guide on our provided screenshot on the patreon post. (See link above for the printing instructions) Only put supports on the underside of the hat, do not add supports to the inside ball attachment of the head, because it would be extremely hard to remove them.
(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)
Post-processing steps:
Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.
Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.
Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.
Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.
Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.
(Allow each layer to dry fully before moving to the next for the best results.)