Melting Skull - 3D print STL and multicolor 3MF file
Become a member on our Patreon and get access to DOZENS of awesome stl and 3mf files from our Serev3D library every month, for only 13$ (That's roughly 50 cents per file!)
More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/
For detailed printing & painting instructions, resources and extra info about this specific design: CLICK HERE
We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!
Also, a few good places where you can share your makes and get a good exposure:
Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d
- New models being released every 2-3 days
- If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List
INCLUDED IN DOWNLOAD:
- Stl and 3mf versions
- Multicolor painted 3mf
- Sturdier and thinner drips versions.
- Printing, painting and post processing instructions and recommendations.
Some extra info about this print:
-
To minimize the amount of supports and printing time needed, keep the orientation of the Skull as it's loaded in the slicer (as shown in the sliced image example in the folder too)
-
To minimize the amount of layer lines, keep the orientation of the Base too.
-
Tested at 100% to 50%
-
The 100% scaled version is suitable as a headphone holder display.
-
If you try to scale it larger, we recommend manually adding some supports to the thin areas of the Skull.
-
If you scale the base or the skull, DON'T FORGET to scale both of them with the same %, so they will fit well together.
-
TO ACHIEVE A NICE SHINY SMOOTH LOOK: try to use ABS instead of PLA filament, and you can apply acetone with a brush or using "acetone vapor bath" to give a smooth glossy look.