tracking pixel
Mike S

Phrozen Sonic Mini 4K Drip Stand

by
scifiguy000
Follow
Follow
Remix Model
scifiguy000
scifiguy000
|
Image 1 of 3
Phrozen Sonic Mini 4K Drip Stand 3d model
scifiguy000
scifiguy000
|
Image 1 of 3
Phrozen Sonic Mini 4K Drip Stand 3d model
2D
3D
Makes
Phrozen Sonic Mini 4K Drip Stand 3d model
Phrozen Sonic Mini 4K Drip Stand 3d model
Phrozen Sonic Mini 4K Drip Stand 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852428.

I made this drip stand to work with the excellent resin vat cover, Thing 4624023. My goal was to have a drip stand that can be left on the vat stud, and coexist with a vat cover without any disassembly. This drip stand was made from scratch in SolidWorks, but was inspired by Thing 4652029.

To use it: Leave it in place during printing. When print is finished, move the build plate with the finished print to the stand, and tighten the build plate attachment knob. When finished printing for the day, return the build plate to the normal position, loosen (but don't remove) the nut where the drip stand is mounted, and rotate the drip stand 180 degrees, then install the vat cover.


1 Likes12 DownloadsOctober 18, 2021


1 Likes12 DownloadsOctober 18, 2021
This model is restricted by licensing terms.