tracking pixel
R

Modular Kallax: A modular mounting system for IKEA KALLAX shelf series

by
robonxt
Follow
Follow
Remix Model
R
robonxt
Image 1 of 14
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
2D
3D
Makes
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
Modular Kallax: A modular mounting system for IKEA KALLAX shelf series 3d model
This model is restricted by licensing terms. 
4 Likes5 DownloadsDecember 19, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5713438.

Concept A mounting system for IKEA KALLAX shelf.

Usage You will need to print:

  • [1x] Center Mount
  • [1x] (whatever part)

You will also need a countersunk M5x12 (or M5x10) screw to connect the two parts together.

Updates 2022.12.14 - Initial release. NEW: Center Mount v1, Headphone Holder v1 2022.12.15 - NEW: 4-Way Cable Clip v2 2022.12.27 - NEW: Center Mount (Short) v1, Adapter to HeyVye Modular Mount System v3, Controller Holder v1, 100mm Split Mount v1, 130mm Split Mount v1 2022.12.28 - UPDATE: Controller Holder v1 to v4 2023.07.14 - Description update to mention requiring a countersunk screw.

History Was looking for a headphone holder that mounts to the cross/center part of a IKEA KALLAX shelf, but since I didn't find one, I thought I'll make one myself. Maybe someone will find this useful as well. Might add more modules soon.

My Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Check part instructions Resolution: 0.12 ~ 0.28 Infill: 15% ~ 100% Filament: SUNLU PLA Silver

Notes Center Mount - Print vertically with the "legs" on top. Supports are required. Headphone Holder - Print vertically. Supports are optional (highly not recommended). 4-Way Cable Clip - Print as is (sideways). Supports are required. Center Mount (Short) - Print vertically with the "legs" on top. Supports are required. Adapter to HeyVye Modular Mount System - Print with the three holes flat side down. Supports are required. Controller Holder - Print with the mounting hole down. Supports are required. 100mm Split Mount - Print with the flat side down. Supports are required. 130mm Split Mount - Print with the flat side down. Supports are required.


4 Likes5 DownloadsDecember 19, 2022




This model is restricted by licensing terms. 
4 Likes5 DownloadsDecember 19, 2022
This model is restricted by licensing terms.