A fun carnival type game. The ball falls into play on the vertical game board and bounces from post to post taking a wild, crazy and unique route to the bottom of the game board every time. The challenge is to figure out where it's going to exit the game board and catch it using the slider.
Complete package with 3D printing instructions & detailed game playing rules.
Also available on on Patreon: https://www.patreon.com/PrintableGames
Files Included:
Board.stl (print 1 of this) Stand.stl (print 1 of this) Slider.stl (print 1 of this) Pipe.stl (print 1 of this) Half Sphere Ball.stl (print 2 of this per ball)
As always, feel free to make things more interesting by printing different pieces in different colors or if you’re feeling even more adventurous try experimenting with different sizing and scaling :)
Tips & Settings:
The balls need to be created by super gluing two half spheres together. Print as many balls as you want. Recommended about 10.
Print the Slider.stl with a brim to avoid the tall narrow section from collapsing during print. To do this, in Bambu Studio, click on the “Others” Tab, and in the “Bed Adhesion” Section Choose: Brim Type > Outer Brim Only.
For the Pipe.stl file, which has some overhangs, print the overhangs at 45 degree angle to avoid long droopy strings inside the tube. To do this, in Bambu Studio, click on the “Strength” Tab, and under the “Advanced” Section, for “Bridge Direction” put 45 instead of 0.
The pipe needs to be super glued to the top of the board (optional, can also be played without the pipe section)