The shaky stacking tower game. Stack rollers on top of a rotating base to form a tower as high as possible without causing it to collapse! The higher you build, the more it wobbles! Comes in two design option and compatible storage boxes.

Complete package with 3D printing instructions & detailed game playing rules.

Also available on Patreon: https://www.patreon.com/PrintableGames

Files Included:

Base V1.stl (print 1 of this) Base V2.stl (print 1 of this, optional bigger design) Plate.stl (print 1 of this) Rollers.stl (print 24 of this) Screw.stl (print 1 of this) Spinner Needle.stl (print 1 of this) Spinner Cap.stl (print 1 of this) Spinner Plate.stl (print 1 of this) Storage V1.stl (print 1 of this, will fit Base V1) Storage V2.stl (print 1 of this, will fit Base V2) Storage Lid V1.stl (print 1 of this, will fit Storage V1 Box) Storage Lid V2.stl (print 1 of this, will fit Storage V2 box)

As always, feel free to make things more interesting by printing different pieces in different colors or if you’re feeling even more adventurous try experimenting with different sizing and scaling :)

Tips & Settings:

No special printing requirements or supports needed.

The rollers can be in any color, the color of the rollers does not affect gameplay.

The spinner needs to be assembled using the Plate, Needle and Cap. No gluing required.

Secure the plate to the base using the Screw. Do not overtighten as to allow the plate to spin freely on the base.

There are two design variations to the base. V2 is bigger than V1. but they both use the same plate. Whatever version you choose, you will need to also print the corresponding storage box and lid due to the different sizes.

Feel free to print more rollers if needed.