The RagTag2 hooks onto your waist or pocket and holds a towel, rag or cloth so that you have it handy whenever you need it whatever you are doing. The RagTag2 will pivot and swivel to allow easy use of your towel without it releasing so the towel stays with you. However, if you need it to release you can pull the towel up and out of the RagTag2 or pull assertively on the towel and the RagTag2 will release.

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Print Settings:

Material = I recommend PETG but any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 40% Ironing = ON (recommended but not critical)

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.

See my blog for more details and other product info… https://www.logicalplanet.com/