2D3D
Makes
This model is restricted by licensing terms.
View license.
47 Likes345 DownloadsJune 28, 2024
This model is restricted by licensing terms.
View license.
This is a significant upgrade to my earlier folding scalpel. Not only is it bigger, stronger and stiffer, but it can also accommodate all #4 scalpel handle blades AND it has offset radii in the pivot allowing it to print easily and still rotate tight in the open and closed positions. Check it out!
100% printed - no hardware, fasteners, or adhesives required. No support required
Free only until July 4 - Please like it and download it if you like it.
See my blog for more details at… https://www.logicalplanet.com/
Recommended Print settings: Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 40% Ironing = ON
Commercial Licensing is available through my Thangs Memberships.
Categories:
47 Likes345 DownloadsJune 28, 2024
This model is restricted by licensing terms.
View license.
47 Likes345 DownloadsJune 28, 2024
This model is restricted by licensing terms.
View license.