Wall Hanger for Airpods Max with Magnetic Sleep Mode - Remix

Remixed from the original Wall Hanger for Airpods Max with Magnetic Sleep Mode by JLiz

The original model was designed to work with 5x2 mm magnets, I changed it to work with 6x2 mm magnets as that's what I had on hand.

Original Description: This holder fits the Airpods Max headphones and has multiple magnets to place the headphones into sleep mode while they're on the holder. The magnets are embedded so that they aren't visible for a cleaner look.

Designed to be used with magnets size 502. Here's the link to the ones I purchased.

https://www.amazon.com/gp/product/B08CN7J2S3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

When printing, you'll need to program a pause so that you can insert the magnets prior to it printing the top of the magnet enclosure. All of the magnets need to be facing the same polarity (which can be a little tricky to insert). It doesn't matter which way they are facing as long as they all match.

We attached to the wall using command strips, but you could easily enough add in counter-sunk holes to attach with screws if preferred.

I've also uploaded it as 3 separate "parts" because I found that there was too much stringing when printing the top "holder" and bottom "magnet" portions simultaneously so I printed them sequentially, but in the same print (not separately then connected afterward).