This is a model of a wall-mounted hook for folding shopping, utility, or laundry carts. The slot for the handle is 1.5 inches x 1 inch. The hook is designed to be mounted with 2 screws. I used two of these hooks to put up my shopping cart which weighs roughly 7.1 Kg or 15.65 Lbs.

I printed this at 0.2 mm layer height with 15% infill and 6 perimeters. I put them up using drywall anchors but ideally, you could hit a stud.

Links to what I used:
*[Shopping Cart](https://a.co/d/0KSr47U)
*[#8-10 White Ribbed Plastic Anchors with Screws](https://www.homedepot.com/p/8-10-White-and-10-12-Blue-Ribbed-Plastic-Anchor-Pack-with-Screws-202-Piece-802474/204273415)

Folding Cart Hook

FoldingCartHook.stl

A set of 5 distinct poker chips, loosely designed to denote differences in value.

Program 2 filament changes at the center of the model, after first set of indents is printed and before the second set of indents is printed.

Each Poker chip adds 1/5 indentation of the central ring.

NO SUPPORTS NEEDED

Poker Chips

Poker Chip 3.stl

Poker Chip 1.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1818559.

hi


Maker Coin

Remixed from the original [Wall Hanger for Airpods Max with Magnetic Sleep Mode](https://www.thingiverse.com/thing:5274973) by [JLiz](https://www.thingiverse.com/jliz/designs)

The original model was designed to work with 5x2 mm magnets, I changed it to work with 6x2 mm magnets as that's what I had on hand.

Original Description:
This holder fits the Airpods Max headphones and has multiple magnets to place the headphones into sleep mode while they're on the holder. The magnets are embedded so that they aren't visible for a cleaner look.

Designed to be used with magnets size 502. Here's the link to the ones I purchased.

https://www.amazon.com/gp/product/B08CN7J2S3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

When printing, you'll need to program a pause so that you can insert the magnets prior to it printing the top of the magnet enclosure. All of the magnets need to be facing the same polarity (which can be a little tricky to insert). It doesn't matter which way they are facing as long as they all match.

We attached to the wall using command strips, but you could easily enough add in counter-sunk holes to attach with screws if preferred.

I've also uploaded it as 3 separate "parts" because I found that there was too much stringing when printing the top "holder" and bottom "magnet" portions simultaneously so I printed them sequentially, but in the same print (not separately then connected afterward).

Wall Hanger for Airpods Max with Magnetic Sleep Mode - Remix

6x2_Full_Print_-_Airpods_Max_Holder.stl

Inquisitive industrial designer, methodically looking for colorful and tongue-in-cheek solutions through digital fabrication.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Kaaassspeeerrr

Achievements

Explorer

Seedling

Folding Cart Hook

Poker Chips

Maker Coin

Wall Hanger for Airpods Max with Magnetic Sleep Mode - Remix