Designed to fit my new needle files.
Hole Diameter: 5.5mm
Please check that this is suitable before printing.

Customised from: [Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607) by [brian.kerley](https://thangs.com/designer/brian.kerley) 

Derived from: [Gridfinity Divider Bin](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins-60721) by [Zack Freedman](https://thangs.com/designer/ZackFreedman) is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt)

Gridfinity 10-Piece Needle File Holder

Designed to fit my new needle files, more images coming soon (idk if this actually works, im printing it rn)

Customised from: [Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607) by [brian.kerley](https://thangs.com/designer/brian.kerley) 

Derived from: [Gridfinity Divider Bin](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins-60721)s by [Zack Freedman](https://thangs.com/designer/ZackFreedman) is licensed under CC BY-NC-SA 4.0

Time for gridfinity to infect every possible area of your household, starting with the bathroom.

Here is a soap holder, to hold your soap. What did you think I was going to say?

The tray should just friction fit on to the top of the base. **I recommend using a layer height of ≈0.1mm for the tray** as it is only 2.5mm thick.


For [Hex Baskets](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), I used the models by [bigbrisco](https://thangs.com/designer/bigbrisco).

This is based of [Zack Freedman](https://thangs.com/designer/ZackFreedman) Gridfinity designs and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Gridfinity Bathroom Soap Holder

DO NOT PRINT_Combined Soap Holder.stl

Hex Tray v3.stl

Soap Holder v2.stl

Extra wide holder for your wide or outstretching nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.

This is based from [Zack Freedman's](https://thangs.com/designer/ZackFreedman) Gridfinity design and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

(Re-upload because Thangs file management is horrific.)

Gridfininity Wide Half/Full Size Nipper Holders

Wide Half Size Nipper Holder v1.stl

Wide Full Size Nipper Holder v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kartelious