A gridfinity holder for a retainer container - size of 1x2x0.5 in gridfinity units. It is fairly simple and designed for a specific case as shown in the image; approximate dimensions of case: 79x27x70mm (lwh in standing orientation, as shown).

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Gridfinity Retainer Container Container

Another entry to the series of bathroom gridfinity accessories - this time, a small and simple addition to improve the hex baskets I use to store toothbrushes and toothpaste. 

This model is designed to very snugly fit on the side of a [Hex Basket](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), by [bigbrisco](https://thangs.com/designer/bigbrisco). In my case, I have it on a 1x2x2 and is **only compatible with 1x1xh or 1x2xh hex baskets** but could be adjusted if desired (f3d file included although not parametric).

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Gridfinity Hex Basket Holder Add-on

Another entry to the series of bathroom gridfinity accessories - this time, a small and simple addition to improve the hex baskets I use to store toothbrushes and toothpaste. This model is designed to very snugly fit on the side of a [Hex Basket](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), by [bigbrisco](https://thangs.com/designer/bigbrisco). In my case, I have it on a 1x2x2 and is only designed to fit on 1x1xh or 1x2xh but can be adjusted if desired (f3d file included although not parametric).

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Very custom fan vent cover to prevent unwanted airflow though an unused fan vent. I don't know how pipe sizing works so heres some vague measurements of the wall plate (without fascia piece): 
- Outer diameter of grid holes: 96mm
- Outer diameter of wall plate: 134mm

(Ignore the printing defects of the curved surface of the plate).

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Fan Vent Cover

Very custom fan vent cover to prevent unwanted airflow though an unused fan vent. I don't know how pipe sizing works so heres some vague measurements of the wall plate (without fascia piece): 
- Outer diameter of grid holes: 96mm
- Outer diameter of wall plate: 134mm

(Ignore the printing defects of the curved surface of the plate)

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Extra wide holder for your wide or outstretching nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.

This is based from [Zack Freedman's](https://thangs.com/designer/ZackFreedman) Gridfinity design and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

(Re-upload because Thangs file management is horrific.)

Gridfininity Wide Half/Full Size Nipper Holders

Wide Full Size Nipper Holder v1.stl

Simple Design for an Electric Toothbrush. This model has a hole radius of 26mm and depth of 8mm. This model works with the ORAL-B Braun Vitality toothbrush.

For [Hex Baskets](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), I used the models by [bigbrisco](https://thangs.com/designer/bigbrisco).

This is based of [Zack Freedman](https://thangs.com/designer/ZackFreedman) Gridfinity designs and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

(ignore the printing defect shown in the community image)

Gridfinity Bathroom Electric Toothbrush Holder

Simple Design for an Electric Toothbrush. This model has a hole radius of 26mm and depth of 8mm. This model works with the ORAL-B Braun Vitality toothbrush.

For [Hex Baskets](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), I used the models by [bigbrisco](https://thangs.com/designer/bigbrisco) 

This is based of [Zack Freedman](https://thangs.com/designer/ZackFreedman) Gridfinity designs and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt)

(ignore the printing defect shown in the community image)

Toothbrush Holder v2.stl

Time for gridfinity to infect every possible area of your household, starting with the bathroom.

Here is a soap holder, to hold your soap. What did you think I was going to say?

The tray should just friction fit on to the top of the base. **I recommend using a layer height of ≈0.1mm for the tray** as it is only 2.5mm thick.


For [Hex Baskets](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), I used the models by [bigbrisco](https://thangs.com/designer/bigbrisco).

This is based of [Zack Freedman](https://thangs.com/designer/ZackFreedman) Gridfinity designs and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Gridfinity Bathroom Soap Holder

DO NOT PRINT_Combined Soap Holder.stl

Designed to fit my new needle files.
Hole Diameter: 5.5mm
Please check that this is suitable before printing.

Customised from: [Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607) by [brian.kerley](https://thangs.com/designer/brian.kerley) 

Derived from: [Gridfinity Divider Bin](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins-60721) by [Zack Freedman](https://thangs.com/designer/ZackFreedman) is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt)

Gridfinity 10-Piece Needle File Holder

Designed to fit my new needle files, more images coming soon (idk if this actually works, im printing it rn)

Customised from: [Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607) by [brian.kerley](https://thangs.com/designer/brian.kerley) 

Derived from: [Gridfinity Divider Bin](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins-60721)s by [Zack Freedman](https://thangs.com/designer/ZackFreedman) is licensed under CC BY-NC-SA 4.0

Hex Tray v3.stl

Soap Holder v2.stl

Wide Half Size Nipper Holder v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kartelious

Achievements

Sapling

Trailblazer

Fan Favorite

Pinned models

Gridfinity 10-Piece Needle File Holder

Gridfinity Bathroom Soap Holder

Gridfininity Wide Half/Full Size Nipper Holders

Gridfinity Retainer Container Container

Gridfinity Hex Basket Holder Add-on

Fan Vent Cover

Gridfininity Wide Half/Full Size Nipper Holders

Gridfinity Bathroom Electric Toothbrush Holder

Gridfinity Bathroom Soap Holder

Gridfinity 10-Piece Needle File Holder