This is a simple to print on fabric bracelet. There are three sizes to choose from (this is the printed size and can be lengthened by adding additional jump rings)
Small - 17cm printed length (6.75 inches) Medium - 20cm printed length (8 inches) Large - 23.5cm printed length (9.25 inches) This size can be used a choker - Just add a longer length of chain to the jump rings
You can estimate around 1 - 1.5 inches of additional length for the 2 jump rings and a small lobster clasp needed to attach the ends together.
There are two 3mf files, one set for 256x256 build plates, and one set for an A1 Mini 180x180 build plate (the only difference is they are placed at a 45 degree angle to accommodate length). There are also the individual STL files if you wish to try your own settings.
In these examples I am using an illusion mesh from www.dfwfabricmart.com Fabric sample packs and holographic PFLAT sheets can be found on my website at www.kaizen3dprints.com
I print these with a .24mm layer height, for a total of 5 layers. The pause command is placed at the beginning of layer 4. I print the first layer at 35mm/s and the following layers at no more than 75mm/s. If I'm using a thicker mesh fabric, I slow my speeds down further and increase the layer height. You can scale the Z axis up or down if you'd like to adjust your layer height (just make your overall height in increments of your layer height)
If you have any questions, please email me at Kaizen3DPrints@gmail.com
Happy Printing!