Remixed from https://www.printables.com/model/695783-quieter-auxiliary-fan-duct-for-creality-k1/files

A fan duct to fit a fan on the left side of a K1 max aux fan
Print with tree support standing on flat surface in ASA or ABS

K1 - Quieter Aux Fan Lefthand side optimised.3mf

K1 - Quieter Aux Fan - aux fan.3mf

This is a low profile clamp to allow a second aux fan to be installed without the cable bracket getting in the way
Print with 99 walls in ASA or ABS

creality K1 low profile cable clamp.3mf

Part Studio 1 - low profile cable clamp.3mf

This fits the yellow Stanley multi angle vice
using 2 M6 x 6mm button head screws to fasten it on.

You will probably need to clean the paint out of the threads with a M6 bottom/plug tap.
I printed this in some 95a durometer tpu on a Creality K1 Max

Stanley multi angle vice clamp protector

Part Studio 1 -  stanley face protector.stl

This 3D model features an M24x3 Jam Nut, a specific type of hexagonal nut used typically in situations where a standard nut would not fit. It is a real-size replica of an M24x3, known for its unique design and commonly used in machinery and automotive applications to lock another nut in place. The model is highly detailed, showcasing the full six-sided shape with perfect dimensions and the interior threading. Suitable for 3D printing, mechanical designs, and engineering applications or as a practical piece in virtual asynchronous tool assembly demonstrations. Must-have for automotive enthusiasts, educators in the field of engineering or for individuals immersed in industrial design.

Printed on a Creality K1 max in white hyper pla
0.1 layer height
0.4mm nozzle
99 walls
220c nozzle temp
45c bed temp

OSSM- m24x3 jam nut.stl

OSSM to fleshlight adapter 
**CAUTION MAY BE TOO TIGHT ON THE BLACK VERSION OF THE FLESHLIGHT HOUSING**
This fits the M24x3 thread and connects to the base of the standard fleshlite housing.
[**Link to full file for editing on onshape**](https://cad.onshape.com/documents/7fa149598cf9a04d45b45387/w/2bca703a4fa1f4835aa6cdc3/e/161fdec8423026e33a26a0e3?renderMode=0&uiState=64cbdffc8cb9121512aa39bf)
_editing the thread size can be done by using the configuration panel current size is 55.5mm_


Printed on a Creality K1 max in white hyper pla
Print settings used:
0.2mm layer hight
0.6mm nozzle
6mm walls
15%infill
220c nozzle
45c bed

OSSM-fleshlight adapter 24mm thread

Part Studio 1 - adaptor.stl

3D MODEL DESCRIPTION
this replaces the plastic tab that latches into the plastic trim of the car holding the cover open.

mine was broken when i purchased the car so i created this to fix it

3D PRINTING SETTINGS
0.1 layer height 0.4 nozzle in pla
use support and orient the parts so the outside of each half is up
this leaves a flat layer to glue together after removing the support material
flip the part as necessary to replace the side that is damaged
remove the rivet from the broken piece using a flat head screwdriver under the washer or drill out with a 4mm (5/32") drill, remove the broken plastic, check the fitment of the new piece,
glue both halves together using superglue making sure the hole lines up, make sure all superglue is cured then push over the metal tab and install a m4 pan head screw into the recessed side and use the original washer and a m4 nut on the back side to secure.

HON-DA ACCORD MK 7 PARCEL SHELF / LOAD COVER REPAIR TAB

accord v1.obj

bottom

Couchmaster cycon 2 LH phone stand

**Requires.**

- 1x m5 x 10 countersunk head bolt.
(optional 2x m4 x 5 cap head bolts or m4 x 4 grub screws to secure the clamp)
and super glue to attach the peg to the base.
- The m16 thread may require some fettling to get it to fit nicely the version 2 is slightly smaller in case you cant file the threads to size after the fit is good enough use a pencil to lubricate the threads.
Print each object separately for the best print quality.
**settings used to print**
0.12 layer height
0.4mm nozzle
walls set to 50 (creates a solid print)
brim used on all prints to ensure good bed adhesion
no supports needed except for the stand mount that needs to be printed upside down to keep the features.


couchmaster cycon phone stand.obj

base

st ratchet

stand

screw

clamp

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

j2.0jmet

Achievements

Seedling