Three different coral inspired wall hooks. Often you don’t have enough hooks for your clothes and accessories – with these designs you can always add more extra pieces to one hook. All three designs are provided in two versions. One with the cut-out holder for fixation with screws and one with a flat back for fixation with wall mount glue.
Instructions (screw version)
- Print the hook and the according holder. The holder has a clearance of 0.2 mm to slide in with a little friction. If your printer has issues with bridging, and the holder does not fit – you can scale the holder down a bit.
- Mount the holder onto the wall with screws and dowels. The Diameter of the screw holes is 5.5 mm. The distance of the screw holes is 16 mm.
- Slide in the holder from the side.
Instructions (glue version)
- Print the complete corals and glue them to your wall with specialized wall mount glue.
Size approximately: 80x80x60 mm You can mirror the corals in your slicer to have 6 different versions.
Print settings Material usage per coral: ca 40g Print time per coral: 3-4 h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 (2mm thickness)
Top/Bottom Layers: 6 (1,2mm thickness) Infill: 30% Build plate adhesion type: none