tracking pixel
gazzaladra

True fruits watering can

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 1 of 6
True fruits watering can 3d model
gazzaladra
gazzaladra
|
Image 1 of 6
True fruits watering can 3d model
2D
3D
Makes
instagram-play
True fruits watering can 3d model
True fruits watering can 3d model
True fruits watering can 3d model
True fruits watering can 3d model
True fruits watering can 3d model
True fruits watering can 3d model
This model is restricted by licensing terms. 

A watering can attachment for a True Fruits bottle. The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.

Size: 60 x 60 x 120 mm This is the V2

Print settings Required build volume: 60 x 60 x 120 mm Material usage: 45g Print time: 4h-5h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0,28mm Outer walls: 3 Infill: 20% Build plate adhesion type: a brim if you have bad bed adhesion

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.


22 Likes77 DownloadsJune 5, 2023


22 Likes77 DownloadsJune 5, 2023
This model is restricted by licensing terms.