True fruits watering can

**A watering can attachment for a True Fruits bottle.**
The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.

Size: 60 x 60 x 120 mm
This is the V2

**Print settings**
Required build volume: 60 x 60 x 120 mm
Material usage: 45g
Print time: 4h-5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: a brim if you have bad bed adhesion

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

plant watering

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

True fruits watering can