Stackable bowl “waterdrop”

A stackable and scalable tray for whatever is just flying around and needs a proper storage location. Combine multiple colors or multicolor filament for a beautiful stack. Add more whenever you filled them up.

Scaling / size Upscaling (100% +): as big as you want Big (100%): Diameter of about 226 mm with a height of 50 mm + a 2.4 mm edge Regular (80%): Diameter of about 180 mm with a height of 40 mm + a 2 mm edge Small (50%): Diameter of about 130 mm with a height of 25 mm + a 1.2 mm edge

Photos by Roomberry

Print settings Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none