gazzaladra

Soap dish “bubbles”

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 3 of 7
Soap dish “bubbles” 3d model
gazzaladra
gazzaladra
|
Image 3 of 7
Soap dish “bubbles” 3d model
2D
3D
Makes
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
Soap dish “bubbles” 3d model
This model is restricted by licensing terms. 

An elegant soap dish with drainage in the style of my bubbles series. Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

Cleaning: Empty out the drain when it is full. I advise to clean the product (as you should do with every soap dish) a few times a year. Best results are achieved with a regular old toothbrush. Scrub it for a minute or two under running warm water.

Size assembled ca: 105 x 105 x 15 mm Photos by Maison Lumiere

Print settings Required build volume: 110 x 110 x 20 mm Material usage: 45g in total Print time: 4-5 h in total

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 20% Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.


37 Likes61 DownloadsJune 29, 2023


37 Likes61 DownloadsJune 29, 2023
This model is restricted by licensing terms.