tracking pixel
gazzaladra

Coconut bowls

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 5 of 10
Coconut bowls 3d model
gazzaladra
gazzaladra
|
Image 5 of 10
Coconut bowls 3d model
2D
3D
Makes
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls 3d model
Coconut bowls - Really fun bowls. I use them for pistachio nuts.  - 3d model
Coconut bowls 3d model
This model is restricted by licensing terms. 

A set of fours bowls that stack up to a full coconut! I 3d scanned one to make this design as realistic as possible. When you don’t need the bowls, you can store them in a space saving and aesthetic way. The cut in the center is intentionally designed so that the parts only fit in one way – to make the stacking easy. You can scale this design freely and print it as big as you want. The default size is the size of the actual coconut that I 3d scanned.

Instructions

  • Print all parts
  • Glue the top and bottom onto the shell
  • Enjoy!

Size assembled: 98 x 98 x 125 mm

Print settings Required build volume: 100 x 100 x 100 mm Material usage: 200 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none


44 Likes93 DownloadsAugust 30, 2024


44 Likes93 DownloadsAugust 30, 2024
This model is restricted by licensing terms.