I wanted to hang my wooden pizza peel on the wall so I made this.
it's handle is approximately 42 by 13mm, so I made this slightly bigger. (46x14).

You should be able to scale it to fit your own, as most will be a similar proportion if not exactly this same size.

I put two screwholes in it as I often do, so that I could mount it in any orientation that gravity would allow, but I actually ended up just sticking it up with some strong double sided mounting tape. YMMV


The Model Requires supports, but its not much.

Pizza Peel Hanger

PizzaPeelHanger.stl



Do you have a Lawnmower 2.0 by Manscaped and want to mount that thang to the dang wall? 

I got you!

Print this little guy right here and use either a screw or some double-sided tape like I did to mount it wherever your little heart desires. You can also mount it on a horizontal surface on the bottom flat face and it'll hold the trimmer up at a sweet 45-ish degree angle, but you'll have to use tape, I didn't put another screwhole for that.

This is for the Lawnmower 2.0. 
Yes, they are up to 4.0 or something now and my model is nearly 5 years old, but it still works great and I've only replaced the blade once (I do not use it daily, though). This is not an endorsement of Manscaped products. 

It may totally work for a Lawnmower 3.0 or 4.0, or other brands. I do not know at all. I can tell you that the opening is approximately 35mm wide by 30mm deep, so you may be able to scale the model and pull it off. Good Luck and let me know if you do, I'll update this description.

This model requires no supports to print. 

The trimmer is supported in such a way that the blade does not touch the inside in any place. This model will not dull your blade.

Try not to put it in a place where it will get full of water, I will put drainage holes in version 2.0. You could drill a hole in it if you have to.

If you read this far, please consider giving the model a Like and checking out my other models! Thanks! 
-Django

Manscaped Lawnmower 2.0 Wall Mount

WallMountManscaped2.stl

I made this to display my Lego Speed Champions and other cars. 
There are two options: a bracket that supports the chassis pieces that most speed champions are built on, or a bracket that you can snap a real Lego 2x4 plate into and attach anything you want to it, like other cars that do not use those common brackets.

There are these two types in two different sizes in the one file ( For 6x wide cars and 8x wide cars). You can separate them yourself in the slicer and use/copy and paste more of whichever ones you need.

These mounts work on anything up to basically a horizontal surface (yes, anything short of the ceiling. The ones with real Lego plates attached will work at any angle, as your Lego connections will fail before the mount does) YMMV, and depends on the set, I have definitely not tested them all. In fact, the picture you see of my four cars is on a sloped ceiling of over 50 degrees.
I added 2 screw holes in case you need to keep them from turning, but I didn't need to use both in most cases.

The Model requires no supports.

There is a hole in the bottom of the plate compatible brackets to allow you to retrieve your 2x4 plate if you are ever done using the bracket for good. 
You should be able, depending on your printers accuracy, to just snap the 2x4 plates into the brackets and no glue will be required. If its too tight, often its just that the corners are too rounded and you can fix it with a sharp knife, cutting the 4 corners to be a little less rounded. If you cannot, just increase it by 1% in your slicer and use glue if its loose. 


Lego Speed Champions Car Mount Universal 

Lego Speed Champions Car Mounts.stl

I made this universal wall mount to display all my cool starfighter models off the wall at an interesting angle. 

It uses one 2x4 plate of the color of your choice that you will permanently glue to the mount, thus ensuring LEGO stud quality connection to your model.
This wall mount comes in 3 sizes, approximately 7cm, 14cm and 20cm versions. All are in the same file along with the mount itself, please delete the ones you don't want in your slicer, but recommend printing all three and using the smallest you can, and reusing the others. The mounting piece itself should snap into place and rotate freely with a little bit of friction so it only turns when you want it to.

This model requires minor supports, I recommend zigzag at 10%

Lego Generic Spaceship Wall Mount system

LEGOWALLMOUNTGENERICV2 v9.stl

This is a Gridfinity compatible 1x2 block that will hold your Mitutoyo Caliper Model 500-196-30. This is the most commonly sold Mitutoyo as of writing this, and I couldn't find a similar stand on Thangs, so I made it.

This is not a true remix (I made it from scratch) but is based in concept on Zach Freedman's original caliper stand.  I thank him for Gridfinity and the proof of concept.
It stands well on its on, but I still recommend using the magnets and the magnetic baseplate for this. Your Mitutoyo was an investment that deserves the protection

It holds 2 batteries as well.

Gridfinity Mitutoyo Caliper Stand 1x2x4 Block. model 500-196-30 

Gridfinity Mitutuyo Stand 1x2 Block 500-196-30 v2.stl

Discover a unique way to showcase your Lego "The Mandalorian's N-1 Starfighter" model number 75325. The ramshackle Naboo Starfighter that Amy Sedaris builds for our masked hero.

This is not just a space-saving solution - it's a decoration piece to boast your Lego collection. It is designed to ensure the set is securely hung and displayed.

The design holds the ship flat against the wall. It is designed for the ship to point upward or downward. You can tilt it a good bit, but it uses gravity to hold the set on the "hooks" so do this at your own risk. if you want it near to sideways , please hit DOWNLOAD ALL, and in the folder you'll find an alternate version labeled "SIDEWAYS" This one is designed for displaying the ship facing left or right (still flat on the wall)


 If you print it in white on a white wall, it basically is invisible at a distance. I used one drywall screw only (though the final version allows two if you want to mount it at an angle) and didn't even put it in a stud or use a drywall anchor, and it holds fine, though your mileage may vary.

If you've been searching for an innovative way to display your Lego pieces, this 3D model promises a solution that's as aesthetically pleasing as it is practical.

Please comment if you have another Lego set and cannot find a way to hang it, I love coming up with these things.

The photo is of a previous version that has since been further refined, but gives a good idea of what to expect. in this case, i added a second screwhole so that it can be used at multiple angles. You probably still wont even need the second screw if using near vertically, it just might turn over time without it.


The model requires no supports.


Wall Mount for Lego The Mandalorian's N-1 Starfighter 75325

LegoTheMandolorian'sN1Starfighterv3WallMount.stl

Discover a unique way to showcase your Lego "Boba Fett's Starship" model number 75312. (Disney won't call it the Slave I anymore apparently) 

This is not just a space-saving solution - it's a decoration piece to boast your Lego collection. It is designed to utilize the set's play feature "handle" as a hook, ensuring the set is securely hung and displayed. 

The design holds the ship approximately 1.5 inches or 4 cm away from the wall, providing an almost floating display. 

Depending how good your printer is at bridging gaps, the model might require minimal supports for printing, I set the supports to zigzag with a 10% infill if using PLA+ like I did, but it is possible to print with no supports.  If you print it in white on a white wall, it basically is invisible at a distance. I used one drywall screw and didnt even put it in a stud or use a drywall anchor, and it holds fine, though your mileage may vary.
 
If you've been searching for an innovative way to display your Lego pieces, this 3D model promises a solution that's as aesthetically pleasing as it is practical. 

Please comment if you have another Lego set and cannot find a way to hang it, I love coming up with these things.

The photo is of a previous version that has since been further refined, but gives a good idea of what to expect.

Wall Mount for Lego Boba Fett's Starship (Slave I) 75312

LegoBobaFettSlaveIWallMount.stl

This is a wall mount for the WP-150, the Waterpik brand flosser. it keeps my unit off the bathroom counter and manages the excess cord.
I always remember to floss when I do not have to plug anything in or pull this thing off a shelf. It's just ready to go.

I designed this wall mount as my first project ever in fusion 360, to learn the software, so please understand I am sure it could be much better. any feedback is much appreciated.

I recommend printing it with 10-15% infill, at least 3 walls and 3 top and bottom shells
I used cubic infill and PLA+
I printed mine at 0.3mm just to save time. 

The screwholes are made for standard drywall screws, something I have a million of. You may want to edit them if you have a special screw you want to use, but its a big enough hole for a lot of common screws and you don't need to worry about them sitting flush anyway. They aren't visible when the unit is in place and the extra 'texture' will help keep your extra cord in place.

When inserting the unit, feed the power cord through your desired exit hole *first*, and don't be afraid to kinda manhandle the wall mount to get the unit into place. You will need to flex the wall mount a little so that where the power cord exits the unit will clear part of the wall. Just force it (flexing the 3d print, not your flosser unit), you wont hurt anything, and the unit is even more snug for it. then align the holes on the underside with the pegs and it should drop right into place.

Please let me know if it could be improved in anyway.

Wall Mount for Waterpik Flosser Model WP-150

Lego Display

I love making practical things with my 3D printer, and expanding my self taught skills with FUSION360. If any of my mounts don't work for you, please send me a comment or message and I'm happy to modify or even consider making new mounts. I'd love to make more custom mounts for lego sets especially, so please hit me up if there's a specific set you need to mount, I might be up for doing it for you. I can even look up the instructions and test the mount with a real lego mockup built from my own collection if it is a set I do not own. Anyway, dont hesitate to ask, though I cannot guarantee Ill be able to do it.

 I love making practical things with my 3D printer, and expanding my self taught skills with FUSION360. If any of my mounts don't work for you, please send me a comment or message and I'm happy to modify or even consider making new mounts. I'd love to make more custom mounts for lego sets especially

Don't hesitate to ask!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ballentinedjango

Designer posts

Don't hesitate to ask!

Pinned models

Lego Generic Spaceship Wall Mount system

Pizza Peel Hanger

Manscaped Lawnmower 2.0 Wall Mount

Lego Speed Champions Car Mount Universal

Lego Generic Spaceship Wall Mount system

Gridfinity Mitutoyo Caliper Stand 1x2x4 Block. model 500-196-30

Wall Mount for Lego The Mandalorian's N-1 Starfighter 75325

Wall Mount for Lego Boba Fett's Starship (Slave I) 75312

Wall Mount for Waterpik Flosser Model WP-150

Lego Display