MagSafe + Pixel Watch 2/3 Charging Station - Floating Pucks
bybakedbean3dA sleek charging station that supports MagSafe and Pixel Watch 2/3 chargers.
This is a modern, sleek charging station for your MagSafe and Google devices that looks great even when not charging anything!
Note: You will need a "MagSafe" case to use the MagSafe charger if you are not using an iPhone.
Assembly
- Just slot the charging portion onto the base
- NOTE: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C.
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.
Printing
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
- Tip: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
- This adds some additional weight to the base
Features
- VHB tape cutouts on the base
- M5 washer cutouts on the base for you to add weight to the base if you'd like
- Note: I highly recommend you use the VHB tape cutouts on the bottom of the base!
Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have
Happy printing!
Categories:
0 Likes0 DownloadsOctober 28, 2024