MagSafe + Pixel Watch 2/3 Charging Station - Floating Pucks

A sleek charging station that supports MagSafe and Pixel Watch 2/3 chargers.

This is a modern, sleek charging station for your MagSafe and Google devices that looks great even when not charging anything!

Note: You will need a "MagSafe" case to use the MagSafe charger if you are not using an iPhone.

Assembly

• Just slot the charging portion onto the base
• NOTE: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C.
• If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.

Printing

• Layer height: 0.2mm - 0.3mm
• Infill: 10%
• Walls: 3
• Support: Organic
  • Tip: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
  • This adds some additional weight to the base

Features

• VHB tape cutouts on the base
• M5 washer cutouts on the base for you to add weight to the base if you'd like
  • Note: I highly recommend you use the VHB tape cutouts on the bottom of the base!

Happy printing!