Introducing the Peppermint Candy Bowl! If you've been around a while you may know that I have a thing for candy, which in turn means I like designing new candy dishes. Especially around the Holidays!
I was originally going to do a "normal" lid, but seeing the peppermint design made me want to see it spin! Kind of like one of those hypnosis wheels. The threading goes all the way through the container, so the lid can thread back through the bottom to be stored while in use. It can also just be spun up a few inches to access the candy!
This design was created primarily for multi-color printers, although it could be painted after printing if you don't have multi-filament capabilities. Both pieces print support-free.
I have also included a pre-painted, .3mf file for multi-color printing.
Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, threads may have issues if scaled down too much. Supports: None Infill/Perimeters: 10% infill + 2 perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: No supports are needed for this model, just print the pieces in the orientation that they import in and screw together afterwards!
File List (3):
- peppermint_container (STL)
- peppermint_lid (STL)
- peppermint_candy_bowl_painted (3MF)