Textured snap-together eggs large enough to hold a few chocolates. Touch them up with a bit of colour?

See here for video: https://youtu.be/J8gPYT0c8-4 

Download the full set:
Download the full set:
Diamond: https://than.gs/m/812746 
Square: https://than.gs/m/812751 
Circle: https://than.gs/m/812752 

The best way to print these is as oriented, with the model raised off the build plate 3mm and tree supports underneath. You will likely need to smooth the surfaces. If they are too tight, snapping them together and apart a few times will loosen it up.

Other snap-together eggs:
Egg Snaps: https://than.gs/m/810065
Basketball: https://thangs.com/mythangs/file/796742 
Tennis Ball: https://thangs.com/mythangs/file/796748 
Baseball: https://thangs.com/mythangs/file/796753


Textured Snap Egg (Diamond)

Display only do not print.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
**Patreon Sculpt, now FREE for you!**
_Sculpt by @ChelsC423_

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Ginger The Baby Dragon

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
Patreon Sculpt, now FREE for you!
**Sculpt by @ChelsC423**

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Are you the type of person that would hide the Easter candy inside of a diabolically frustrating puzzle? Of course you are.

See here for video: https://youtu.be/0gb21NwdFzw 

This puzzle is part of the family of different “6-Piece Burr Puzzle” configurations. This is a “Level 1” design because one piece needs to be moved (“unlocked”) before you can begin to disassemble the puzzle. Taking it apart is tricky, but putting it back together is much harder!

Can’t figure out how to fit the pieces fit together? 
See here for an instructional model: https://social.thangs.com/m/617380 
And here for an instructional video: https://youtu.be/UcFXx5P6eX4

Similar puzzles:
Anatomical Heart Puzzle: https://social.thangs.com/m/693398
Ripple Ball Burr Puzzle: https://social.thangs.com/m/617381
Valentine’s Heart Puzzle: https://social.thangs.com/m/639563 


Easter Egg Candy Puzzle

 License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
_Easy printing planter/bowl.
Includes option with holes for hanging!_
***

Halloween Print Skull Bowl/Planter

HalloweenStuff_Skull-PlanterBowl.stl

**Start making money by selling 3D printed models. Sign up to the PrintStart3D Thangs Membership to sell my models in your shop and more!**

For more content visit me on Instagram: www.instagram.com/PrintStart3D

Thank you so much for the support <3
Pumpkin Stash with Lid

I was able to print this model without support material

STL Files + Commercial License available on Thangs!

2-3 walls
Print at 0.2mm layer height with no supports.

Pumpkin Stash with Lid

Bottom.stl

Three unique Easter Eggs with threaded inserts on the bottom to secure your treats.

See here for video: https://youtu.be/SCnWNjmKLi0 

The models have been optimized to reduce the number of overhangs as much as possible, but there are some small unavoidable overhangs and angles that might need a bit of cleanup afterwards with a file.

More Easter Egg designs:
Chain Link: https://than.gs/m/801279 
Celtic Knot: https://than.gs/m/801493 
Wicker: https://than.gs/m/801616 


For more of my Easter Egg series from previous years search for “Minimal Surface Eggs” and “Easter Eggshells.”


Three Stochastic Easter Eggs

Stochastic Egg 1.stl


License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
_Only small supports needed under the tip of the arms and the overhang on the knife!_

Cute Murder Corn

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Who doesn't love a good chocolate bunny?!
PRINTS WITHOUT SUPPORTS!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Chocolate Bunny -(No Supports)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***Easy printing planter/bowl.
Includes option with holes for hanging!***
***
_If you enjoy our free models that we release here on Thangs, please consider supporting us and also receive exclusive Patron models every month as well!
**Check us out here:
https://www.patreon.com/chaoscoretech_**

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***


BumbleBee Skull Planter-Bowl 

BumbleBee_Skull Planter.stl

It’s all about the snap. Will also hold a jellybean or small chocolate.

See here for video: https://youtu.be/p5RxgP4WY7Y 

The best way to print these is as oriented, with the model raised off the build plate 3mm and tree supports underneath. You will likely need to smooth the surfaces. If they are too tight, snapping them together and apart a few times will loosen it up.

Other snap-together eggs:
Basketball: https://thangs.com/mythangs/file/796742 
Tennis Ball: https://thangs.com/mythangs/file/796748 
Baseball: https://thangs.com/mythangs/file/796753


Egg Snaps

This decorative Easter Egg is part of a set of three “Organic Eggs” with threaded inserts on the bottom.

See here for video: https://youtu.be/hpSOy8PuNR4 

Download the full set:
Organic Egg 1: https://than.gs/m/818080 
Organic Egg 2: https://than.gs/m/818082 
Organic Egg 3: https://than.gs/m/818085 


The models have been optimized to reduce the number of overhangs as much as possible, but there are some small unavoidable overhangs and angles that might need a bit of cleanup afterwards with a file.

For more Easter Egg designs:
Stochastic Eggs: https://thangs.com/mythangs/file/787027 
Chain Link: https://than.gs/m/801279 
Celtic Knot: https://than.gs/m/801493 
Wicker: https://than.gs/m/801616

For more of my Easter Egg series from previous years search for “Minimal Surface Eggs” and “Easter Eggshells.”


Organic Egg 1

Organic Egg 1.stl

This ornament can be used as a gift box or to add more candy to your holiday decorations!

See here for video: https://youtu.be/8ERq0DS-dCY 

See here for other ornament containers:

Open:
Voronoi: https://social.thangs.com/m/553347 
Diamond: https://social.thangs.com/m/553321 

Closed:
Hex: https://social.thangs.com/m/551141 
Diamond: https://social.thangs.com/m/551149

Textile:
Knitted: https://social.thangs.com/m/567021 
Wicker: https://social.thangs.com/m/567023 



This design uses a threaded insert to connect the two hemispheres allowing them to be printed flat on the build plate. You will need to add some supports inside when printing.


Diamond Ornament Container (Open)

Display only Do not post.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***Easy printing planter/bowl.
Includes option with holes for hanging!***
***
_If you enjoy our free models that we release here on Thangs, please consider supporting us and also receive exclusive Patron models every month as well!
**Check us out here:
https://www.patreon.com/chaoscoretech_**

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***

Zebra Skull Planter-Bowl

Zebra_SkullPlanter.stl

The ventricles in this full-sized anatomically correct human heart are large enough to hold a nice selection of chocolates. For your weirdo Valentine. Or cardiologist. The model can be used again for Halloween.

See here for video: https://youtu.be/k8YbW3daSc0 

There are four versions provided: “Plain,” “Magnet,” “Supports,” and “Support Magnet”. Each version includes a “Lid” and “Base”

In the “Plain” version, the Lid is held loosely in place with the overlap of the atria around the ventricles. If you want the lid held more securely, print one of the “Magnet” versions and insert four 3mmx3mm (1/8” x 1/8”) cylindrical neodymium magnets into the two holes in the Lid and Base.

The “Supports” versions are pre-supported on the inner overhangs that are not reachable from the build plate. You will still need to add supports to the bottom.

Print both files as oriented. The “Base” prints in normal orientation, but the lid needs to print upside down to preserve the smoothness of the contact area and ensure that the lid fits nicely on the base. 

I recommend raising the Lid off the surface of the build plate by 3mm and building tree supports underneath. This means that you will need to do a bit of cleanup on what will become top of the lid.


Open Heart Chocolate Box

This textured ornament can be used as a gift box or to hide your candy stash in plain view!

See here for video: https://youtu.be/OheuRst9rJg 

See here for other ornament containers:

Open:
Voronoi: https://social.thangs.com/m/553347 
Diamond: https://social.thangs.com/m/553321 

Closed:
Hex: https://social.thangs.com/m/551141 
Diamond: https://social.thangs.com/m/551149

Textile:
Knitted: https://social.thangs.com/m/567021 
Wicker: https://social.thangs.com/m/567023 


This design uses a threaded insert to connect the two hemispheres allowing them to be printed flat on the build plate with no supports. This makes them easier to print and means that the entire outer surface can be textured.


Hex Ornament Container (Closed)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by Garrett***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Voronoi Egg Containers

VorEgg2.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Whether you love or hate these things, they are a classic!
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Peep Bunny Bowl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
At this size, you can use a small piece of 1.75mm filament and slot it in for the bow!
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Red Cupid M&M

You puzzle me. Also I love you. Secret compartments inside for candy or love notes.

See here for video: https://youtu.be/y3Zoqu1biZg 

This puzzle is part of the family of different “6-Piece Burr Puzzle” configurations. This is a “Level 1” design because one piece needs to be moved (“unlocked”) before you can begin to disassemble the puzzle. Taking it apart is tricky, but putting it back together is much harder!

Can’t figure out how to fit the pieces fit together? 
See here for an instructional model: https://social.thangs.com/m/617380 
And here for an instructional video: https://youtu.be/UcFXx5P6eX4

Similar puzzles:
Ripple Ball Burr Puzzle: https://social.thangs.com/m/617381


Valentine’s Heart Puzzle

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
_Sculpt by @ChelsC423_
**PRINTS WITHOUT SUPPORTS!**


candy

Most Popular of All Time

Categories

Popular

Personalize

Trending