12oz Ice Cream Cone can cup. Perfect for keeping your beverages cold on hot summer days!

Ice Cream Cone Cup v1.stl

Thangs Workspace Challenge Contest entry. This 16oz Sand Castle can cup is a Remix of Mandicreally's blank can cup model. Perfect for keeping your beverages cold while hanging out at the beach this summer!

Prints 100% Support Free!

#thangsworkspace

Sand Castle Can Cup_Thangs Workspace Challenge 

#ThangsWorkspace Can Cup

Sand Castle Cup Top v10.stl

This Toyota TRD 4x4 Off Road Coozie fits most standard 12oz beer and soda cans.

Prints with no supports.

TRD 4x4 OffRoad Coozie

This One Punch Man inspired "Oppai" Can Coozie fits most standard 12oz beer and soda cans.

Prints with no supports.

OPPAI Can Coozie

Insert for 12oz can cups to turn them into a self watering plant pot! This insert fits all of my 12oz can cup/coozie designs, and should fit can cups from other designers as well! Turn your under used can cups into living display pieces!

Self Watering Planter Insert for 12oz Can Cups

80mm Version of my Togepi Can Cup designed to fit children's sippy cups.

80mm Togepi Can Cup

Adapter Sleeve 70mm.stl

Adapter Sleeve 75mm.stl

This 12oz Can Cup is a remix of my Pokeball Joy Con Grip Can Cup, updated in the style of the Ancient Pokeballs from Pokemon Legends: Arceus.  It has slots on the side to attach Nintendo Joy-Con controllers so you can enjoy a nice cold beverage while hunting for all those shiny pokemon or playing any of your other favorite switch games.

The design is a remix of My Pokeball Joy Con Grip Can Cup, which was a remix of MandicReally's Warped Pipe - Nintendo Joy Con Grip 12oz Can Cup found @ https://thangs.com/MandicReally/Warped-Cup--Nintendo-Joy-Con-Grip-12oz-Can-Cup-18438 created in collaboration with MandicReally.

The Ancient ball portion of the model is a combination of my own designs and a few elements taken from the Arceus Pokeball model by Thinair3d.

Designed for a standard 12oz can with a 66m Diameter but can also accept most 16oz cans provided they do not have a sticker as a label.

INCLUDED FILES:
STEP File
Pokeball Joy Con Grip Can .STL
.STL for an adapter sleeve to fit 58mm cans

PRINT PARAMETERS:
Supports required underneath ring and latch only.
Prints beautifully at a .2mm layer height
I run them at 60mm/sec, 40mm/sec on the outer layer with 3 walls and 15% infill
I recommend making sure that Ironing is disabled as it produces a less than desirable layer near the bottom of the print that is quite noticeable.

POST PROCESSING:
Joy-Con Grips may require sanding for optimal fit, I use a flat jeweler's file which works great. I have found that in most cases this is dependent on the filament.

Arceus Ancient Pokeball JoyCon Grip Can Cup

APB JoyCon Grip.step

This is a - 16oz version of my Toxic Sludge can holder that will fit most energy drinks and 16oz beer cans.  It is a two part model allowing you to mix and match colors in whatever combination you want.

**Printing Parameters:**

- .2mm layer height
- 60mm/sec inner layers
- 50mm/sec outer layer
- No supports necessary

Update 1/28/22 - 
The original barrel was just a hair to loose for energy drinks.  I took the measurements off of a craft beer with a stick on label not realizing the sticker would have that much of an effect on things. The updated model fixed this issue.

This model is free for personal use.  Sale of physical prints is not allowed without my explicit consent.

16oz Toxic Sludge Can Koozie

Toxic Sludge 16oz v5.step

This is a standard 12oz can holder that will fit most beer and soda cans.  It is a two part model allowing you to mix and match colors in whatever combination you want.

*More sizes will be coming, including 16oz cans, and 12oz slim cans*

**Printing Parameters:**

- .2mm layer height
- 60mm/sec inner layers
- 50mm/sec outer layer
- No supports necessary 


This model is free for personal use.  Sale of physical prints is not allowed without my explicit consent.

Toxic Sludge Can Cup

Toxic Sludge Can Cup.step

A Togepi Pokemon themed can cup for standard 12oz cans.

Togepi Can Cup 12oz.stl

This 12oz Can Cup is inspired by the wildly popular Pokemon anime, video game, and trading card game.  It has slots on the side to attach Nintendo Joy-Con controllers so you can enjoy a nice cold beverage while hunting for all those shiny pokemon or playing any of your other favorite switch games.

The design is a remix of MandicReally's Warped Pipe - Nintendo Joy Con Grip 12oz Can Cup found @ https://thangs.com/MandicReally/Warped-Cup--Nintendo-Joy-Con-Grip-12oz-Can-Cup-18438 created in collaboration with MandicReally

Designed for a standard 12oz can with a 66m Diameter but can also accept most 16oz cans provided they do not have a sticker as a label.

**INCLUDED FILES:**
CAD STEP File
Pokeball Joy Con Grip Can .STL
.STL for an adapter sleeve to fit 58mm cans

**PRINT PARAMETERS:**
Zero Supports required
Prints beautifully at a .2mm layer height
I run them at 60mm/sec, 40mm/sec on the outer layer with 3 walls and 15% infill
I recommend making sure that Ironing is disabled as it produces a less than desirable layer near the bottom of the print that is quite noticeable.

**POST PROCESSING:**
Joy-Con Grips may require sanding for optimal fit, I use a flat jeweler's file which works great. I have found that in most cases this is dependent on the filament.

Pokeball Joy Con Grip Can Cup

Pokeball_Joy_Con_Grip_v5.step

Joy_Con_Grips_v1.step

58mm version for White Claw, Truely, Redbull cans.

58mm_Pokeball_Joy_Con_Grip_Can_Cup_v1.step

58mm version for White Claw, Truely, Redbull cans

58mm_Pokeball_Joy_Con_Grip_Can_Cup_v1.stl

12oz can koozie with Scion logo.  Fits most standard beer and soda cans.

Printed with three walls, at a .2mm layer height and 15% infill.  No supports needed.

I am providing this file free for personal use. Selling of this file or printed items from this file a prohibited without my written consent.

ScionCoozie v2.stl

These Squid Game can coozies will fit most standard size beer and soda cans. 

Printed with three walls, at a .2mm layer height and 15% infill.  No supports needed on the circle or triangle.  The square may require some support at the top of the square. I haven't actually printed it yet so I will update with what I find out when I do.

I am providing this file free for personal use. Selling of this file or printed items from this file a prohibited without my written consent.


Squid Game Triangle Coozie v2.stl

Squid Game Circle Coozie v2.stl

Squid Game Square Coozie v3.stl

This pokeball can coozie will fit most standard size beer and soda cans. 

Printed with three walls, at a .2mm layer height and 15% infill.  No supports needed.

I am providing this file free for personal use. Selling of this file or printed items from this file a prohibited without my written consent.

Pokeball Can Coozie

This pokeball can coozie will fit most standard size beer and soda cans.

I am providing this file free for personal use. Selling of this file or printed items from this file a prohibited without my written consent.

Pokeball Coozie Final v4.stl

Shamrock can coozie for standard 12oz beer and soda cans.

Printed with three walls, at a .2mm layer height and 15% infill.  No supports needed.

I am providing this file free for personal use. Selling of this file or printed items from this file a prohibited without my written consent.

Shamrock coozie v3.stl

Shamrock can coozie for standard 12oz beer and soda cans.

Shmarock_Final_v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Glytch3d