Lighthouse Dice Towerby
A Dice Tower/Tealight Holder Combo. The inspiration behind this was a lighthouse, although to be honest it could past as a normal tower as well. This design prints in 4, support-free pieces and links together afterwards. You can use the design with the pieces just stacked on top of each other, or you can glue the bottom 3 pieces. The top piece serves as a "lid" to hold the tealight candle (battery powered ONLY, don't use a real candle please).
I had someone suggest creating some features around the base of the tower to "catch" the dice. I have plans to do this still, so be on the lookout for a "diarama" version of the tower in the near future.
Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM - FDM Scaling: Can be scaled up, may not work too well scaled down. Supports: None Infill/Perimeters: 25% Infill + 2 Perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: There are 4 pieces to print for this design. They are all SUPPORT-FREE. Just print and stack together. You may choose to glue the bottom 3 pieces together.
File List (4):
- lighthouse_tower (STL's)
- lighthouse_balcony (STL's)
- lighthouse_tealight_holder (STL's)
- lighthouse_cap (STL's)