This is the Christmas Lightbulb Ornament/Container. This design prints in 2, support-free pieces that thread together afterwards. The cap has a hole cut through so you can route thread through for hanging!
The "lightbulb" portion is hollow, with an opening of about 30mm so it can be stuffed with small candy or other things. The entire design prints in about an hour on my Bambu printers!
Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, threads may have issues if scaled down too much. Supports: None Infill/Perimeters: 10% infill + 2 perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: No supports are needed for this model, just print the pieces in the orientation that they import in and screw them together afterwards!
Assembly:
- Lid threads onto the container.
File List (2):
- christmas_bulb (STL)
- christmas_bulb_lid (STL)