Introducing Barry Bones the half-dead, articulating Halloween Teddy Bear! This is a print-in-place, support-free design. Well...there is one built in support requiring you to twist and "crack" his neck after removing from the build plate. Good thing he's already half dead!

I have also included a painted file for Bambu Slicer for anyone that doesn't want to paint it themselves!

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, scaling down may cause issues with the articulation points. Supports: None Infill/Perimeters: 15% infill + 2 perimeters. Use 3 perimeters for extra strength. Nozzle Size: 0.4 Layer Height: 0.2 (Adaptive layer height if you can, or the smaller the layer height the better.)

Printing & Assembly: This design prints in place with no additional supports or assembly needed! There is a little bit of built-in support within the head. After printing, just twist the head to break the support free!

Single Color Printing

• Just import the model, slice, and print!

Multi-Color Printing

• If you use BambuSlicer, I have included the full color Bambu file.

To Paint Yourself:

• Import the model into your slicer.
• Split to Parts
• Change filament for whichever parts you want!
• Print!

File List (1):

• barry_bones_multicolor_bambu_file (BambuSlicer)

STL's (1)

• barry_bones_v1 (STL)