tracking pixel
Jacob P

Barry Bones

by
ThinAir3D
Follow
Follow
Remix Model
ThinAir3D
ThinAir3D
|
Image 2 of 9
Barry Bones 3d model
ThinAir3D
ThinAir3D
|
Image 2 of 9
Barry Bones 3d model
2D
3D
Makes
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model
Barry Bones 3d model

Introducing Barry Bones the half-dead, articulating Halloween Teddy Bear! This is a print-in-place, support-free design. Well...there is one built in support requiring you to twist and "crack" his neck after removing from the build plate. Good thing he's already half dead!

I have also included a painted file for Bambu Slicer for anyone that doesn't want to paint it themselves!

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, scaling down may cause issues with the articulation points. Supports: None Infill/Perimeters: 15% infill + 2 perimeters. Use 3 perimeters for extra strength. Nozzle Size: 0.4 Layer Height: 0.2 (Adaptive layer height if you can, or the smaller the layer height the better.)

Printing & Assembly: This design prints in place with no additional supports or assembly needed! There is a little bit of built-in support within the head. After printing, just twist the head to break the support free!

Single Color Printing

  • Just import the model, slice, and print!

Multi-Color Printing

  • If you use BambuSlicer, I have included the full color Bambu file.

To Paint Yourself:

  • Import the model into your slicer.
  • Split to Parts
  • Change filament for whichever parts you want!
  • Print!

File List (1):

  • barry_bones_multicolor_bambu_file (BambuSlicer)

STL's (1)

  • barry_bones_v1 (STL)

90 Likes81 DownloadsOctober 14, 2023


90 Likes81 DownloadsOctober 14, 2023