Snow Globe Votive Ornament - Winter Cabin

Insert an LED tea light candle (<38mm dia) in the base to light up the cabin.

Print in place with no supports needed. Brim build plate support recommended.

Updated V2. - Fixed deer antlers and smoke.
Updated V3. - Fixed Cabin

Creative Commons License BY-NC-ND 4.0

Snow Globe Votive Ornament - Winter Cabin

Snow Globe Votive Ornament - Winter Cabin

Insert an LED votive candle in the base to light up the cabin.

Print in place with no supports needed. Brim build plate support recommended.

Creative Commons License BY-NC-ND 4.0

A cat climbing the windowblinds

Print at 0.3mm layer height

If using Bambu Studio set the wall generator to Arachne

If using Cura make sure 'print thin walls' is checked.

Print the first 4 layers in white then swap to black for the rest of the print

This ornament can be paired with my Peeking Dog which you can download here: https://than.gs/m/945314

Hanging Cat Ornament

A cat climbing the windowblinds

Print at 0.3mm layer height

If using Bambu Studio set the wall generator to Arachne

If using Cura make sure 'print thin walls' is checked.

Print the first 4 layers in white then swap to black for the rest of the print

**Print-In-Place, No Supports**
      
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Find the Multicolor version here: https://than.gs/m/971983**
**Find the plain ORNAMENT version here: https://than.gs/m/971397**
**Find the Multicolor ORNAMENT version here: https://than.gs/m/971985**

_The sound of bells a’jingling and light hoofbeats through the air
Form a joyous serenade that makes the whole wide world aware
That St. Nick is drawing nearer and the sky shall soon display
A parade of Lil Reindeer and a Happy Lil Sleigh!_

The [winter dragons](https://than.gs/m/960234) aren't the only fun, articulated holiday friends coming to town for Christmas this year.

Happy Lil Reindeer & Happy Lil Sleigh is the tenth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

**If you'd like to see the rest of the crew, check out the full parade of Happy Lil Reindeer over here:**

**Tight Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970606
**Medium Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970609
**Loose Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970612

For another little Christmas friend, check out
**Christmas Kitty**
https://than.gs/m/972086
**Christmas Kitty - Christmas Ornament**
https://than.gs/m/972090

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)


Happy Lil Reindeer

HappyLittleReindeer.stl

**[Special Thanksgiving Edition](https://than.gs/m/964381) now available for [subscribers](https://than.gs/u/803093?plans=true)!**

**[Mace Edition](https://than.gs/m/969867) now available for [subscribers](https://than.gs/u/803093?plans=true)!**

---

See it in action here: https://youtube.com/shorts/A2oVwtr6K3I

Addon for my [Christmas Chain](https://than.gs/m/963853). Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a Christmas Chain of appropriate length (I'm using length 14, it feels nice) and attach the **Ring** and **End** to the chain. Ready to spin!

Prints nicely without supports!

---

Don't forget to check out my Instagram and YouTube channel for more interesting projects!
https://www.instagram.com/jaatinen3d
https://www.youtube.com/@Jaatinen3D

Ringchaku Spinning Fidget Toy || Christmas Chain

Christmas Chain V1.2 - Ringchaku Ring.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
  
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Find the ORNAMENT version of Happy Lil Reindeer here: https://than.gs/m/971397**

_The sound of bells a’jingling and light hoofbeats through the air
Form a joyous serenade that makes the whole wide world aware
That St. Nick is drawing nearer and the sky shall soon display
A parade of Lil Reindeer and a Happy Lil Sleigh!_

The [winter dragons](https://than.gs/m/960234) aren't the only fun, articulated holiday friends coming to town for Christmas this year.

Happy Lil Reindeer & Happy Lil Sleigh is the tenth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970606
**Loose Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970612

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Other Models:**
Find Happy Lil Reindeer on its own over here:

**Happy Lil Reindeer**
https://than.gs/m/970097

For another little Christmas friend, check out
**Christmas Kitty**
https://than.gs/m/972086
**Christmas Kitty - Christmas Ornament**
https://than.gs/m/972090


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Medium Tightness Joints)

HappyLilSleigh_MediumTightness.stl

This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an improved tealight compartment with screw on cap (print separately). Holds tealights up to 40mm in diameter.

Built-in scaffolding supports are to be removed.

Creative Commons License BY-NC-ND 4.0
A commercial license to sell these prints is available by subscribing to my Thangs Commercial Partner membership plan.

Suggested Print Settings – PrusaSlicer
Print in place – no supports necessary (organic/tree supports can be used to create a cleaner print)
Layer Height: 0.2mm
Infill: 8% Gyroid
Perimeters: 2 or 3 (2 will make the tealight glow more prominent, 3 should improve the exterior surface quality)
Extra Perimeters if Needed: X
Extra Perimeters on Overhangs: X
Avoid Crossing Curled Overhangs: X
Seam Position: Random
Enable Dynamic Overhang Speeds: X
Adjust Retraction Settings for excessive retractions dependent on filament.


Snowglobe Votive Ornament - Xmas Town

snowglobe_XmasTown.stl

Mother ornament

Mother.stl

A simple and quick Mother and Child Day Ornament.

Prints without supports

Simple Quick Mother and Child Ornament

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
Easy Printing! 

Bumble Decorates for Christmas

Bumble_XmasLights.stl

An elegant holiday decoration created by overlapping diamond patterns over a basic ball with stem. The ornament is printed as a single piece. It requires some infill, but only in certain places.

The ornament prints very well with the standard 0.4mm nozzle but prints even better with a 0.25 nozzle.

I've provided my PrusaSlicer 3mf file (for 0.4mm nozzle), which includes all the height adjustments to minimize weight while providing the necessary top, bottom, and infill needed for a beautiful print. Some supports are needed, but not a lot. I used organic supports.

I included GCODE in my 3MF file to reduce the nozzle temp at key places to avoid having the filament overheat. The nozzle starts at 200c and decreases at key points down to 180c. You may need to adjust these based on your filament.

The filament shown is MatterHackers Quantum Purple Gold. The design will look good in a variety of filaments, from single color silky or glitter filaments to rainbow and 2 or 3 color filaments.

Have fun and if you like how it turns out, please post a make.

Happy holidays!

Christmas Ball with Intersecting Diamonds

Quad Four Point Diamond Ball Final.stl

These vintage-style ornaments are designed for spiralized printing to maximize translucency and minimize material and print time. Download includes six different mix-and-match styles!

See here for video: https://youtu.be/Y1fUPk6tqWA 

When printed with a 0.4mm nozzle, each ornament requires less than 8g of material. You could print over 125 ornaments with 1kg of filament! A great way to get the most out of your specialty (expensive!) filaments.

For each ornament, you will need to print out a “top” and “Bottom” file. Be sure to use “spiralized” or “vase” mode! You will need to open up the hole in the top by trimming the inside protrusion with a pair of clippers. See video for demo.

Here are some recommendations for spiralized printing:
- Use thick layer heights, 0.2mm or greater
- Set your “Bottom Layer” to 1
- Try using a skirt for bed adhesion, but if that is not working then try a brim. You will just have to remove the brim afterwards
- If you get funny stringing on the top layer, try moving the z-seam alignment around

AI generated description:

Discover the distinct beauty of vintage-style, 3D printed ornaments at Thangs.com. Expertly designed by DaveMakesStuff, these ornaments are suitable for spiralized printing, ensuring maximum transparency while minimizing material usage and printing time. The downloadable files include six different mix-and-match styles, perfect for adding a unique touch to your festive celebrations or home décor. 

These 3D model ornaments are not only aesthetically pleasing but also practical. When using a 0.4mm nozzle for printing, each ornament requires less than 8g of material. This means one could yield over 125 ornaments from just 1kg of filament, thereby maximizing the efficiency of your specialty or expensive filaments.

The package consists of a top and bottom file for each ornament. Printing in 'spiralized' or 'vase' mode is recommended. Once printed, based on user observations, it might be necessary to enlarge the hole at the top by clipping the protruding inside gently with a pair of clippers. Also remember to use thick layer heights of 0.2mm or more for best results. 

For extra stability, consider using a skirt for bed adhesion. If you're running into any issues, switch to a brim, which can then be removed post-print. Users who've noticed stringing on the top layer suggest experimenting with z-seam alignment. 

Experience the charm of vintage ornaments and boost your 3D printing efficiency with these intricate designs. Explore the world of 3D models in the Home & Garden category on Thangs.com today.

Spiralized Ornaments - Vintage

Vintage 2 Top.stl

These vintage-style ornaments are designed for spiralized printing to maximize translucency and minimize material and print time. Download includes six different mix-and-match styles!

See here for video: https://youtu.be/JIcOVe_VUuc 

 More Spiralized Ornaments:
Vintage: https://than.gs/m/964487 
Textured: 

When printed with a 0.4mm nozzle, each ornament requires less than 8g of material. You could print over 125 ornaments with 1kg of filament! A great way to get the most out of your specialty (expensive!) filaments.

For each ornament, you will need to print out a “top” and “Bottom” file. Be sure to use “spiralized” or “vase” mode! You will need to open up the hole in the top by trimming the inside protrusion with a pair of clippers. See video for demo.

Here are some recommendations for spiralized printing:
- Use thick layer heights, 0.2mm or greater
- Set your “Bottom Layer” to 1
- Try using a skirt for bed adhesion, but if that is not working then try a brim. You will just have to remove the brim afterwards
- If you get funny stringing on the top layer, try moving the z-seam alignment around


Spiralized Ornaments - Textured

Hex Top.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
   
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Find the ORNAMENT version of Happy Lil Reindeer here: https://than.gs/m/971397**

_The sound of bells a’jingling and light hoofbeats through the air
Form a joyous serenade that makes the whole wide world aware
That St. Nick is drawing nearer and the sky shall soon display
A parade of Lil Reindeer and a Happy Lil Sleigh!_

The [winter dragons](https://than.gs/m/960234) aren't the only fun, articulated holiday friends coming to town for Christmas this year.

Happy Lil Reindeer & Happy Lil Sleigh is the tenth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970606
**Medium Tolerance Happy Lil Reindeer & Sleigh:**
https://than.gs/m/970609

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Other Models:**
Find Happy Lil Reindeer on its own over here:

**Happy Lil Reindeer**
https://than.gs/m/970097

For another little Christmas friend, check out
**Christmas Kitty**
https://than.gs/m/972086
**Christmas Kitty - Christmas Ornament**
https://than.gs/m/972090

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Loose Joints)

HappyLilSleigh_Loose.stl

This angel isn't just a statue decoration, she's an invitation to creativity. because I've got a challenge for you – remixes are highly encouraged! Let's see how you can reimagine this celestial beauty.

Maybe add some LED lights to illuminate her from within, hollow her out and make a Christmas tree topper, play with colours and sizes – the sky's the limit!

oh and It's designed for easy, support-free printing!

I can't wait to see the unique twists you all put on this design.

Christmas Angel

Christmas Angel_SparkyFace5.3mf

Star Wars inspired ornament.

Add your childrens name to the model to provide a personalised Fathers Day gift or a gift for a Father at any other time :)

I have included versions for 1 - 6 children. 
**If anybody wants more than six let me know and I can add them too.

I Am Their Father Ornament (six versions)

StarWars IATF 3 kids.stl

StarWars IATF 5 kids.stl

StarWars IATF 6 kids.stl

Wicked Patreon is proud to present the Deadpool Statue model.

Deadpool Statue 1/4 Scale STL tested and ready for 3D printing.

Supported and Non Supported versions for 3D printing.

WICKED MARVEL DEADPOOL STATUE: TESTED AND READY FOR 3D PRINTING

Katana's_Holder.stl

Three sizes of “Ice Bubbles” designed for spiralized printing to maximize translucency and minimize material and print time. These are great prints for your clear or translucent filaments!

See here for video: https://youtu.be/xJ5POHSJL1I 

Files are provided for 30mm, 40mm, and 50mm diameter balls. You will need to print two pieces to make one ball. When printed with a 0.5mm nozzle, the balls require 3g, 5.4g, 8.4g of filament. That means 1kg of filament you could make approximately 333 small Ice Balls!

Here are some recommendations for spiralized printing:
- Use thick layer heights, 0.2mm or greater
- Set your “Bottom Layer” to 1
- Try using a skirt for bed adhesion, but if that is not working then try a brim. You will just have to remove the brim afterwards
- If you get funny stringing on the top layer, try moving the z-seam alignment around

AI generated description:

Explore the exquisite collection of 3D models on Thangs.com, featuring "Ice Bubbles" designed by DaveMakesStuff. These models bring a touch of novelty to your home & garden decorations, incorporating a unique element of translucency due to spiralized printing methods. The design minimizes both print time and material consumption, making it an efficient choice for 3D printing enthusiasts. These models are especially attractive when printed with clear or translucent filaments, further enhancing their ice bubble visuals.

The ice bubbles come in three different sizes: 30mm, 40mm, and 50mm, each requiring two printed pieces to complete a single ball. With a 0.5mm nozzle, the balls require 3g, 5.4g, and 8.4g of filament respectively. This means that with a single 1kg filament roll, one can produce approximately 333 small Ice Balls, perfect for decorating your space or hosting a themed party!

It is recommended to use thick layer heights of 0.2mm or greater for spiralized printing. Customize your settings to a 'Bottom Layer' of 1. For bed adhesion, you may use a skirt, but a brim can be adopted if the skirt proves ineffective, with the brim being removable afterwards. If you encounter stringing on the top layer, try adjusting the z-seam alignment for better results. Utilize these unique 3D models to bring a cool aesthetic to your home and garden décor. Check the images to have a better understanding of the final product and achieve the best-printed output for these unique Ice Ball designs.

Ice Bubbles

Ice Bubble 50mm.stl

Get caught up in some Calvin & Hobbes snow shenanigans with this classic creative and festive scene. Keyed for easier painting and printing.

 Don't forget to share your makes, I love seeing your work

Calvin Hobbes Snow Scene

Calvin Hobbes SnowBear_SparkyFace5.3mf

This ornament can be used as a gift box or to add more candy to your holiday decorations!

See here for video: https://youtu.be/8ERq0DS-dCY 

See here for other ornament containers:

Open:
Voronoi: https://social.thangs.com/m/553347 
Diamond: https://social.thangs.com/m/553321 

Closed:
Hex: https://social.thangs.com/m/551141 
Diamond: https://social.thangs.com/m/551149

Textile:
Knitted: https://social.thangs.com/m/567021 
Wicker: https://social.thangs.com/m/567023 



This design uses a threaded insert to connect the two hemispheres allowing them to be printed flat on the build plate. You will need to add some supports inside when printing.


Diamond Ornament Container (Open)

Display only Do not post.stl

Beautiful wind spinner that changes shape as it spins.

Prints without supports

One of two designs, find the other one here: https://than.gs/m/853901

See them in action here: https://vimeo.com/826034863?share=copy

#OutdoorThangs

Wind Spinner Two

Beautiful wind spinner that changes shape as it spins.

Prints without supports

One of two designs, find the other one here:

See them in action here: https://vimeo.com/826034863?share=copy

ornament

Most Popular of All Time

Categories

Popular

Personalize

Trending