American Flag Challenge Coin Display

An American Flag Challenge Coin Display. *Note: This design was created with a 250x250 build volume in mind. You CAN scale it down to accomodate smaller printers, but it won't be able to fit larger coins the further it is scaled down. This design prints in separate pieces and is designed to be glued together. This design can be wall-mounted, or displayed on a desk with the included feet.

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up if you have a larger printer, can be scaled down but size of coins may limit this. Supports: None Infill/Perimeters: 15% Infill + 2 Perimeters Nozzle Size: 0.4 Layer Height: 0.2

Printing & Assembly: Print all pieces and glue together afterwards. The longer pieces need to be printed at a 45 degree angle, with the backplate printing on its top top. I have included a Bambu .3mf file with the pieces oriented and split up by color if for those of you printing this design on a Bambu printer.

File List (8):

• back plate (white) (STL)
• foot (need 2) (STL)
• shelf (long, need 2) (STL)
• shelf (short, need 1) (STL)
• stripe (long, need 1) (STL)
• stripe (short, need 3) (STL)
• star plate (blue) (STL)
• american flag coin display (.3mf)