tracking pixel
Thangs

Pencil case by gazzaladra

by
Thangs
Follow
Follow
Remix Model
Thangs
Thangs
|
Image 8 of 9
Pencil case by gazzaladra 3d model
Thangs
Thangs
|
Image 8 of 9
Pencil case by gazzaladra 3d model
2D
3D
Makes
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
Pencil case by gazzaladra 3d model
This model is restricted by licensing terms. 

This featured model from gazzaladra is part of the Thangs Presents! Welcome to 3D Printing: Deluxe Edition membership plan.

If you enjoy this model, be sure to check out other models from gazzaladra and follow for more amazing content!


A small pencil case intended for travel. A quick-to-print and robust companion for drawing or taking notes. The Files are provided with and without the compartments. Without compartments it can also be used for other writing or drawing equipment. Before insertion bend the lid in the front a little to ease up the living hinge. Move it in and out a few times to “sand down” minor print inconsistencies.

  • Size closed: 190 x 50 x 20 mm
  • Inner size: 180 x 42 x 15 mm
  • Maximum pencil size: 180mm length, 15mm diameter
  • Compartment width: 12,6 mm

This is the V2 – The V1 is still included

Print settings Required build volume: 210x210x30mm (can fit a even smaller print bed if rotated) Material usage: 60g Print time: 5h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none If your printer tends to warp – print the base with a brim


10 Likes1 DownloadsMay 30, 2024


10 Likes1 DownloadsMay 30, 2024
This model is restricted by licensing terms.