HEARTWOOD | Scalable Vase, fast-print by CharlesRegaud

This featured model from CharlesRegaud is part of the Thangs Presents! Welcome to 3D Printing: Deluxe Edition membership plan.

If you enjoy this model, be sure to check out other models from CharlesRegaud and follow for more amazing content!

HEARTWOOD | Scalable Vase, fast-print

The fast-printing HEARTWOOD vase is meant to look like an organic sculpture made from a core of heartwood, the dense, inner part of a tree that showcases rich, swirling grains.

It looks great with dried flowers, but you can make the vase watertight (see print settings) and go for live bouquets!

You can scale this model up and down to any size you want. It comes as a solid model, and you can define in your slicer what size you want it to be, and how many perimeter walls you want.

Happy printing!

DIMENSIONS | Ø 120mm x H 200 mm

3D PRINT SETTINGS For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to at least 3. (the vases in the pictures were printed with 2 walls and are very much watertight. But 3 walls and up would be safer). To make it a "vase", do not use "vase mode", but instead set the "top layers" to 0, which cancels the top face and makes your vase open.

Resolution: 0.2~0.3 mm or less Wall line count (perimeter walls): at least 3 Top layers: 0 Bottom layers: 3 to 6, depending of the layer height you picked. Try to aim for a bottom thickness of at least 1 to 2mm. Infill: None (0%) Build adhesion type: None Supports: None