If you get value from my work, consider supporting me at [stu142.com/supportme](https://stu142.com/supportme). Links may be affiliate links. 

Mini sailboat model of a laser. It's easy to print, given the multiple parts, and allows for different colors. 

**Assembly:** 
1. Print sail and hull. 
2. Print the mast sleeve if you desire for aesthetics. 
3. clip sail into the hull. 
4. slide on the mast sleeve. 

**My Print Settings:**
- PETG gives better durability, but PLA works fine
- 10% infill
- 3 Perimeters
- 0.2 mm layer height

**Materials Used (Affiliate):**
- Polymaker Polylite PETG Grey: [Amazon](https://geni.us/yFW3kPi)
- Polymaker Polylite PETG Green: [Amazon](https://geni.us/ZbAOij)

**Alternative Material Options:** 
- Polymaker Polyterra PLA: [Amazon](https://geni.us/qoaqfE)

Mini Sailboat Laser

Laser Hull.stl

If you get value from my work, consider supporting me at [stu142.com/supportme](https://stu142.com/supportme)

**More sizes are available [here](https://www.printables.com/model/725407-gridfinity-stack-printing-baseplate). Due to the large file sizes I didn't want to inculde them all in this listing where individual downloads are not possible**

These Gridfinity baseplates are stacked and oriented so that you can print multiple at a time with no support. The baseplates easily break apart after printing. 

The first is right side up then the rest are upside down to eliminate overhangs.

Important Note: 

The success of this print can be heavily dependent on slicer and printer factors and may take some trial and error to get it right. The model has been designed for 0.2 mm layers and 0.4 mm nozzles with a one-layer gap between pieces to help break them apart after printing. 

A flat head screwdriver can help separate parts but be gentle. 

These baseplates deviate slightly from the original Gridfinity spec (0.1 mm wider bin slot), but that will have no effect, and they are fully compatible. 

Gridfinity Documentation if interested: [https://stu142.com/Gridfinity-Documentation/](https://stu142.com/Gridfinity-Documentation/)

**My Print Settings:** 

- NO Supports
- Ironing Set to all Top Surfaces
- 3 perimeters
- 0.2 mm layer height
- 0.4 mm nozzle
- Brim if having bed adhesion troubles

**Materials Used (Affiliate):**

- Polymaker Polylite PETG Teal: [Amazon](https://geni.us/r1CFN3E) 
- Polymaker Polylite PETG Purple: [Amazon](https://geni.us/H1aIx) 

**Alternative Material Options:** 
- Polymaker Polyterra PLA: [Amazon](https://geni.us/qoaqfE)

Gridfinity Stack Printing baseplate

4 x 4 - 4 Stack Gridfinity Baseplate.stl

If you get value from my work, consider supporting me at [stu142.com/supportme](https://stu142.com/supportme). Links may be affiliate links. 

This is a GPU Support that I designed to help prevent sag. It is placed under the corner of the GPU and extends to the bottom of your PC case, and I think it looks pretty cool. 

I have included a large selection of sizes, so measure the vertical distance to where you would like your graphics card to be and select that size. 

Ensure there is no interference with GPU fans.

**Optional Extras:** 

1. A [2mm thick rubber sheet](https://geni.us/mujr1Y)(Amazon) can be cut to size and stuck or glued to the bottom to provide grip. 
1. [6mm x 2mm magnets](https://geni.us/X9t1M)(Amazon) can be pressed or glued into the bottom using the magnet adapter printed piece. 

**My Print Settings:** 

- PLA or PETG work fine
- minimum 3 perimieters
- 10% infill
- 0.2 mm layer height
- Brim

**Materials Used (Affiliate):**

- Polymaker Polylite PETG Teal: [Amazon ](https://geni.us/r1CFN3E)
- Polymaker Polylite PETG Purple: [Amazon](https://geni.us/H1aIx) 

**Alternative Material Options:** 

- Polymaker Polyterra PLA: [Amazon](https://geni.us/qoaqfE)

GPU Support Hexagon

72 mm Hexagon Pattern GPU Support.stl

FreeCAD file and STEP Files for my Hexagon GPU Support model. 

The FreeCAD file has all dimensions easily editable via the dimension variable spreadsheet.  It can be slow to load changes depending on computer hardware. 

Let me know if you encounter any errors with the model and I will do my best to fix them. 

GPU Support Hexagon CAD Files

150 mm Hexagon Pattern GPU Support.step

FreeCAD file and STEP Files for my Square Spiral GPU Support model. 

The FreeCAD file has all dimensions easily editable via the dimension variable spreadsheet.  It can be slow to load changes depending on computer hardware. 

Let me know if you encounter any errors with the model and I will do my best to fix them. 

GPU Support Square Spiral CAD files

72 mm Spiral Square GPU support.stl

If you get value from my work, consider supporting me at [stu142.com/supportme](https://stu142.com/supportme)

This is a GPU Support that I designed to help prevent sag. It is placed under the corner of the GPU and extends to the bottom of your PC case, and I think it looks pretty cool.

I have included a large selection of sizes, so measure the vertical distance to where you would like your graphics card to be and select that size. 

Ensure there is no interference with GPU fans.

**Optional Extras:** 

1. A 2mm thick rubber sheet can be cut to size and stuck or glued to the bottom to provide grip. 
2. 6mm x 2mm magnets can be pressed or glued into the bottom using the magnet adapter printed piece. 

**My Print Settings:** 

PLA or PETG work fine
- minimum 3 perimieters
- 10% infill
- 0.2 mm layer height
- Brim

**Materials Used (Affiliate):**

- Polymaker Polylite PETG Teal: [Amazon](https://geni.us/r1CFN3E) 
- Polymaker Polylite PETG Purple: [Amazon](https://geni.us/H1aIx) 
- 2mm Rubber: [Amazon](https://geni.us/mujr1Y)
- 6mm x 2mm magnets: [Amazon](https://geni.us/X9t1M)

**Alternative Material Options:**

- Polymaker Polyterra PLA: [Amazon](https://geni.us/qoaqfE)

GPU Support Star Spiral

72 mm round spiral GPU Support.stl

150 mm round spiral GPU Support.stl

If you get value from my work, consider supporting me at [stu142.com/supportme](stu142.com/supportme)

This is a GPU Support that I designed to help prevent sag. It is placed under the corner of the GPU and extends to the bottom of your PC case, and I think it looks pretty cool.

I have included a large selection of sizes, so measure the vertical distance to where you would like your graphics card to be and select that size. 

Ensure there is no interference with GPU fans.

**Optional Extras:**

A 2mm thick rubber sheet can be cut to size and stuck or glued to the bottom to provide grip. 
6mm x 2mm magnets can be pressed or glued into the bottom using the magnet adapter printed piece. 

**My Print Settings:** 

PLA or PETG work fine
minimum 3 perimieters
10% infill
0.2 mm layer height
Brim

**Materials Used (Affiliate):**

Polymaker Polylite PETG Teal: [Amazon ](https://geni.us/r1CFN3E)

2mm Rubber: [Amazon](https://geni.us/mujr1Y)

6mm x 2mm magnets: [Amazon](https://geni.us/X9t1M)

**Alternative Material Options:**

Polymaker Polyterra PLA: [Amazon](https://geni.us/qoaqfE)

GPU Support Triangle Pattern

72 mm Round Triangle GPU support.stl

150 mm Round Triangle GPU support.stl

If you get value from my work, consider supporting me at [stu142.com/supportme](stu142.com/supportme)

Airlpane phone holder that also works with different devices. Clips onto the tray or sits on top of the tray. Consisted of two slim pieces instead of a thick one for easier storage and less space required during travel. 

The Measurement in the file name is the phone slot width.

Simply Measure the thickness of your device and select it from the range of options available. 

**Examples:**

- Switch = 15 mm phone stand
- phone depends on the case but generally around 12 mm is good



PETG is Suggested to allow some flex and durability but PLA worked fine for me for one trip. 

**My Print Settings:**

- minimum 3 perimieters
- 10% infill
- 0.2 mm layer height
- Brim

**Materials Used (Affiliate):**

Polymaker Polylite PETG Teal: [Amazon](https://geni.us/r1CFN3E) 

Airplane Phone Holder

6 mm Airplane Phone Holder.stl

All my models are free, but please consider supporting me if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

**Update: Check out my new FreeCAD Gridfinity Workbench for many more options and features: [https://github.com/Stu142/FreeCAD-Gridfinity-Workbench](https://github.com/Stu142/FreeCAD-Gridfinity-Workbench)**

The file allows the ability to edit the size of the bin and features very easily such as:

length and width
screw and magnet holes on or off
stacking lip on or off
wall thickness
height
You can find a guide to editing the FreeCAD file here: https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing

Gridfinity Documentation to understand the dimensions of the model can be found here: https://stu142.github.io/Gridfinity-Documentation/

 

Similar to Hardware Used (Affiliate Links):

6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)

M3 Screw Set : https://geni.us/gfP7w (Amazon)

M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)

 

Update V2 - 2023/11/18

added ability to turn on and off:
magnet holes
screw holes
sequential bridging
stacking lip
added sequential bridging for bottom holes so no support is needed

FreeCAD Gridfinity Parametric Storage Bin

FreeCAD Gridfinity Bin.stl

All my models are free, but please consider supporting me if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

**Update: Check out my new FreeCAD Gridfinity Workbench for many more options and features: [https://github.com/Stu142/FreeCAD-Gridfinity-Workbench](https://github.com/Stu142/FreeCAD-Gridfinity-Workbench)**

The file allows the ability to edit the size of the bin and features very easily via the spreadsheet, such as:

- length and width
- screw and magnet holes on or off
- stacking lip on or off
- wall thickness
- height
- scoop on or off

You can find a guide to editing the [FreeCAD](https://www.freecad.org/) file here: https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing

Gridfinity Documentation to understand the dimensions of the model can be found Here: https://stu142.github.io/Gridfinity-Documentation/
 

Similar to Hardware Used (Affiliate Links):

[6mm x 2mm Magnets](https://geni.us/X9t1M)  (Amazon)

[M3 Screw Set :](https://geni.us/gfP7w)  (Amazon)

[M3 Heat Set Insert:](https://geni.us/Svm0Sl) (Amazon)

Update V2- 2023/12/17
- Fixed scoop cut constraint error

FreeCAD Gridfinity Parametric Simple Storage Bin-Body.stl

All my models are free, but please consider supporting me if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

**Update: Check out my new FreeCAD Gridfinity Workbench for many more options and features: [https://github.com/Stu142/FreeCAD-Gridfinity-Workbench](https://github.com/Stu142/FreeCAD-Gridfinity-Workbench)**

The file allows the ability to edit the size of the bin and features very easily such as:

- length and width
- screw and magnet holes on or off
- height


You can find a guide to editing the FreeCAD file here: https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing

Gridfinity Documentation to understand the dimensions of the model can be found here: https://stu142.github.io/Gridfinity-Documentation/

 

Similar to Hardware Used (Affiliate Links):

6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)

M3 Screw Set : https://geni.us/gfP7w (Amazon)

M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)

FreeCAD Gridfinity Parametric Bin Blank.stl

FreeCAD Gridfinity Parametric Bin Blank-Body.stl

All my models are free, but please consider supporting me if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

**Update: Check out my new FreeCAD Gridfinity Workbench for many more options and features: [https://github.com/Stu142/FreeCAD-Gridfinity-Workbench](https://github.com/Stu142/FreeCAD-Gridfinity-Workbench)**

The file allows the ability to edit the size of the bin and features very easily such as:

- length and width
- screw and magnet holes on or off
- height

You can find a guide to editing the FreeCAD file here: 
https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing

Gridfinity Documentation to understand the dimensions of the model can be found here: https://stu142.github.io/Gridfinity-Documentation/


 

Similar to Hardware Used (Affiliate Links):

6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)

M3 Screw Set : https://geni.us/gfP7w (Amazon)

M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)

FreeCAD Gridfinity Parametric Bin Base Blank-Body.stl

All my models are free but please consider supporting me if you find my work useful: [http://paypal.me/Stu142](http://paypal.me/Stu142). Much appreciated if you do!

**Update: Check out my new FreeCAD Gridfinity Workbench for many more options and features: [https://github.com/Stu142/FreeCAD-Gridfinity-Workbench](https://github.com/Stu142/FreeCAD-Gridfinity-Workbench)**

**You can find a guide to edit the file here:** [https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing](https://github.com/Stu142/Freecad-Gridfinity-dimension-variable-editing)


inspired by [https://www.printables.com/model/237486-gridfinity-baseplate-parametric-freecad-file](https://www.printables.com/model/237486-gridfinity-baseplate-parametric-freecad-file)

This is a FreeCAD version of the Gridfinity baseplate that you can edit to make you own sizes or versions. FreeCAD is totally free and open source, download it here: [https://www.freecad.org ](https://www.freecad.org )

Gridfinity Documentation to understand the dimensions of the model can be found here: [https://github.com/Stu142/Gridfinity-Documentation/tree/main](https://github.com/Stu142/Gridfinity-Documentation/tree/main)

FreeCAD Gridfinity Parametric Baseplate

FreeCAD Gridfinity Parametric Baseplate.stl

All my models are free but please consider supporting me if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

This is a Pull Fid used to splice ropes. It works very well and is very cheap. 

all you need is a pack of wire and some electrical tape and you can make many. The black wire shown in the picture worked fine but I reccomend stainless steel. 

To make the handle cut a section of doubled up wire the length you want the tool to be plus 1 foot past. This will give you many wraps around the handle to make it secure. 


Wrap with wire around tightly then cover with electrical tape and your done!

Pull Fid Rope Splicing Tool.stl

Pull Fid Splicing Tool.stl

All my models are free but please consider donating if you find my work useful: http://paypal.me/Stu142. Much appreciated if you do!

This is a key hook design to work with the gridfinity ecosystem. 

There are 3 options for holes on the bottom:

- There are magnet hole
- M3 heat set insert(HSI)
- M3 self tap and magnet. 

Hardware used (Affiliate Links):
6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)
M3 Screw Set : https://geni.us/gfP7w (Amazon)
M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)



Gridfinity Key Hook

Gridfinity Key Hook V1 - magnets and m3 HSI.STL

This is a gridfinity bin for holding a [LTT Screwdriver](https://geni.us/CRqfkPo) (Amazon).

There are 3 configurations with different mounting hole combinations on the bottom. They are designed using sequential bridging so no supports are needed. 

1. magnets = Press fit magnets.
2. M3 = Space to screw the bin down from the bottom with a M3 screw, works with some bases.
3. HSI = M3 heat set insert, with you can set with a soldering iron and screw the bin to the base.

 All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes and time spent on this model. Much appreciated if you do. Thanks!

Hardware used (Affiliate Links):
6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)
M3 Screw Set : https://geni.us/gfP7w (Amazon)
M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)


Gridfinity LTT Screwdriver Holder

Gridfinity LTT screwdriver holder - Magnets and M3 HSI.STL

This is a GPU Support that I designed to help prevent sag. It is simply placed under the corner of the GPU and extends to the bottom of your PC case and I think it looks pretty cool.

I have included a large selection of sizes so just measure the vertical distance to where you would like your graphics card to be and select that size. I think I have covered them all but I could include additional sizes by request.

Make sure it doesn't get in the way of GPU fans. 

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes and time spent on this model. Much appreciated if you do, thanks!

GPU Support

GPU Support 72mm.STL

I remixed the model from https://www.printables.com/model/252022-parametric-gridfinity-solidworks. I realized that some of the dimensions were outdated or didn't work quite right so I made some minor dimension changes and have reuploaded the files here. 

Check out some Gridfinity documention I have created if interested: [https://stu142.com/Gridfinity-Documentation/](https://stu142.com/Gridfinity-Documentation/)

The configuration can be adjusted by clicking managing equation folder and changing the number of grids or dividers. 

It now matches the Gridfinity website https://gridfinity.xyz/specification/ . 

I have added two other versions that are simply the base for a bin or component to be built on top of. 

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes and time spent on this model. Thanks!

Hardware used (Affiliate Links):
6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)
M3 Screw Set : https://geni.us/gfP7w (Amazon)
M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)


Solidworks Gridfinity Parametric Bin

Gridfinity Bin Parametric.SLDPRT

I like everything having a specific place with this desk organizer each item will be right where you want it every time. The desk organizer holds pencils, pens, erasers, rulers, and scissors. There are spots on the bottom of the base for rubber feet if desired. 

There are 8 pencil/pen slots with a diameter of 12 mm.
Eraser slots are 14 mm x 24 mm.
Ruler slots 3 mm x 35 mm.
Scissor slot 5 mm x 17 mm.

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes of this model. Thanks!


Desk Organizer

Organizer top V2.STL

I wanted a handle for my printer bed but was disappointed that all of the options that I found could cause bed leveling problems.

This handle does not touch the springs and instead grips on the shape of the y axis plate.

Each handle also needs a clip to ensure that it does not come off. Line up the bump on the clip with the cut in the handle piece.

There are left and right handles with the option for bed up and down arrows on the handle or without and just blank.

I made the tolerances as tight as I could and the handles seem to be solid for me and don't move around when attached. Can loosen slightly over time but does not affect functionality.

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes of this model. Thanks!

Bed Handle for Ender 3 

bed_handle_left.STL

Modified a design by Qwervy https://www.thingiverse.com/thing:2063412 to mount to the v slot on the ender 3 and ender 3 pro.

The printer will only go to 235 height without touching cutters in the holder. If you don't do tall prints it shouldn't be a problem.

I printed with the top facing down on the print bed with a raft for better adhesion because of the small surface area especially with rounded edges(Optional).

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to by me a coffee or help fund the failed prototypes of this model. Thanks!

Flush Cutter Holder for 20x20 Extrusion, Ender 3

flush cutter holder rounded edges.STL

You want to Commercially sell my designs or just really want to support my work. Thank You!
- Use All designs for commercial use while subscription is active
- Unlimited downloads
- All supporter and supporter plus benefits


Commercial Partner

You want to support me even more. Thank You!

- All Supporter Tier Benefits
- 50 downloads Per month

Super Supporter


**Benefits**
- Access to Parametric FreeCAD file of my designs that are customizable by the spreadsheet workbench
- Access to STEP files of my designs
- 10 Downloads per month


Stu142

Achievements

Seedling

Explorer

Fan Favorite

Pinned models

GPU Support

Gridfinity Stack Printing baseplate

Mini Sailboat Laser

Gridfinity Stack Printing baseplate

GPU Support Hexagon

GPU Support Hexagon CAD Files

GPU Support Square Spiral CAD files

GPU Support Star Spiral

GPU Support Triangle Pattern

Airplane Phone Holder

FreeCAD Gridfinity Parametric Storage Bin

FreeCAD Gridfinity Parametric Simple Storage Bin-Body.stl

FreeCAD Gridfinity Parametric Bin Blank.stl

FreeCAD Gridfinity Parametric Bin Base Blank-Body.stl

FreeCAD Gridfinity Parametric Baseplate

Pull Fid Rope Splicing Tool.stl

Gridfinity Key Hook

Gridfinity LTT Screwdriver Holder

GPU Support

Solidworks Gridfinity Parametric Bin

Desk Organizer

Bed Handle for Ender 3

Flush Cutter Holder for 20x20 Extrusion, Ender 3