This is 1 of the files you will get in first month for joining with both Licenses
this is the small size version for the 220mm bed a smaller version 5ft version No supports, No glue, No paint and No sanding needed.
Printing Instructions:
Infill I recommend at a minimum of 10% pattern type I use is lines to get best print quality a recommend 0.4 nozzle at 0.2 mm layer height. I recommend at a minimum of two perimeters. Four bottom and top layers. Print speed I'm unfamiliar with the newer printers as mine is the ender 3 so I don't have input shaper you may want to print slower I'm going to put a recommendation of a maximum of 100mm millimeters per second for things like the ribs and teeth but depending on your printer it may need to even be slower and for the rest use your best judgment.
Do not use sink filament or any other brittle filament. The best filaments to use are PLA Pro, PLA+, or PETG. Choosing a reliable brand is advisable.
Agreement and Liability Disclaimer: By downloading and using this file, you agree to the following terms: You understand and acknowledge that SparkPrinting3D is not responsible for any injuries, damages, or losses that may occur from the use or misuse of this file or the resulting 3D printed product. You assume full responsibility for the safe handling, assembly, and use of the product.
The hardware you will need is Safety Glasses, glove, long sleeve shirt, pants, shoes, bit adjustable screwdriver and you will need one #6 1inch screw
Safety and Usage Disclaimer:
These 3D printed models are not toys and are not intended for children. Choking Hazard: The models contain small, intricate parts that may pose a choking hazard. Keep out of reach of children and pets. Recommended for ages 14 and up. When assembling you should not stand directly underneath the 3D printed parts when putting it on the wall you should be at least 18 inches from the wall so it can't fall on you. Models may contain sharp and pointy parts, such as ribs, teeth, and claws. Use safety glasses, gloves, long sleeves, and proper footwear shoes when assembling. Do not place in high-traffic areas, such as hallways, or areas where people walk directly underneath. Avoid placing behind couches or other seating areas where falls could cause injury. The creator assumes no responsibility for injuries or damages resulting from the use or misuse of these models. This includes damages to property, such as televisions or other items, that may occur if the model falls. Also in addition during the assembly process 3D printed parts should be placed in a box or out of the way where they are not on the floor where anyone can trip on them step on them or fall on them this could cause serious injury SparkPrinting3D Will not be held responsible or liable for any damages or injuries occurred during the assembling process.