You will need to read the Agreement, Liability Disclaimer, and Non-Commercial Use Terms. By purchasing this, you agree to the terms.

You will get access to my Discord server, assembly guides, the ability to vote on future projects, working loyalty rewards on Discord, and fast support on Discord if models have problems or questions. Additionally, with the starter pack, you will receive 22 files. These include:

Four different bed sizes for dinosaur feet—T-Rex, Raptor, and Spinosaurus—totaling 12 files.

A wall mount skull for the T-Rex in two sizes for the 220mm bed.

Two sizes of Raptor skulls, plus name plates and backboards for both Raptor and T-Rex. These can also be mounted on PC cases.

Each month, you will receive 1 to 2 new large dinosaur wall mounts. For each dinosaur, you will get the large 220mm bed size version, which prints in sections. The final size of the large model will vary based on the anatomy of the dinosaur but is estimated to be between 4 to 5 feet (1200mm to 1500mm) from head to tail. Additionally, you will receive small and mid-size versions for 220mm, 300mm, and 400mm printer beds. The small versions fit as one piece on the printer, and the mid-size versions come in two sections, approximately double the size of the print bed used. You will also receive 1 to 2 new mount skulls for PC mods and wall mounts. These have the same mounting holes, so they can be used for either purpose. In total, you will receive 5 to 10 new models each month.

All large 220mm bed size versions will be in rotation. October will feature the large 220mm bed size Raptor, which reaches 51 inches (1295mm) long, and the Brachiosaurus, which is about 5 feet (1500mm) long.

NOTE: Rotation is only for large 220mm bed versions. The 300mm, 400mm, and 800mm versions will be available for purchase in my store.

Safety and Usage Disclaimer

These 3D printed models are not toys and are not intended for children. Choking Hazard: The models contain small, intricate parts that may pose a choking hazard. Keep out of reach of children and pets. Recommended for ages 14 and up. When assembling, you should not stand directly underneath the 3D printed parts. When placing them on the wall, you should be at least 18 inches away from the wall to prevent the model from falling on you. Models may contain sharp and pointy parts, such as ribs, teeth, and claws. Use safety glasses, gloves, long sleeves, and proper footwear when assembling. Avoid placing models in high-traffic areas, such as hallways, or areas where people walk directly underneath. Do not place them behind couches or other seating areas where falls could cause injury. The creator assumes no responsibility for injuries or damages resulting from the use or misuse of these models. This includes damage to property, such as televisions or other items, that may occur if the model falls. During assembly, 3D printed parts should be placed in a box or out of the way to avoid tripping hazards. SparkPrinting3D will not be held responsible or liable for any damages or injuries occurring during the assembly process.

Agreement and Liability Disclaimer

By purchasing and using these files, you agree to the following terms:

You understand and acknowledge that SparkPrinting3D is not responsible for any injuries, damages, or losses that may occur from the use or misuse of this file or the resulting 3D printed product.

You assume full responsibility for the safe handling, assembly, and use of the product.

Terms of Use: Non-Commercial Use Only

You are free to use these 3D printable files for personal, non-commercial purposes only.

Prohibition on Use in Machine Learning and AI: These files may not be used in any machine learning or AI programs for training or any other purpose.

No Modifications: You may not modify, adapt, or create derivative works from these files.

No Distribution or Sharing: You may not distribute, share, or make these files available to others in any form.

Social Media Use:

You are allowed to share pictures and videos of your 3D printed creations on social media. However, sharing the files themselves is strictly prohibited.

These terms can change at any time at the discretion of SparkPrinting3D. It’s best to check the Discord server to see any new terms of use.

You will need to read the Agreement, Liability Disclaimer, and Non-Commercial Use Terms. By purchasing this, you agree to the terms.

You will get access to my Discord server, assembly guides, the ability to vote on future projects, working loyalty rewards on Discord, and fast support on Discord if models have problems or questions. Additionally, with the starter pack, you will receive 22 files. These include:

Four different bed sizes for dinosaur feet—T-Rex, Raptor, and Spinosaurus—totaling 12 files.

A wall mount skull for the T-Rex in two sizes for the 220mm bed.

Two sizes of Raptor skulls, plus name plates and backboards for both Raptor and T-Rex. These can also be mounted on PC cases.

Each month, you will receive 1 to 2 new large dinosaur wall mounts. For each dinosaur, you will get the large 220mm bed size version, which prints in sections. The final size of the large model will vary based on the anatomy of the dinosaur but is estimated to be between 4 to 5 feet (1200mm to 1500mm) from head to tail. Additionally, you will receive small and mid-size versions for 220mm, 300mm, and 400mm printer beds. The small versions fit as one piece on the printer, and the mid-size versions come in two sections, approximately double the size of the print bed used. You will also receive 1 to 2 new mount skulls for PC mods and wall mounts. These have the same mounting holes, so they can be used for either purpose. In total, you will receive 5 to 10 new models each month.

All large 220mm bed size versions will be in rotation. October will feature the large 220mm bed size Raptor, which reaches 51 inches (1295mm) long, and the Brachiosaurus, which is about 5 feet (1500mm) long.

NOTE: Rotation is only for large 220mm bed versions. The 300mm, 400mm, and 800mm versions will be available for purchase in my store.

Safety and Usage Disclaimer

These 3D printed models are not toys and are not intended for children. Choking Hazard: The models contain small, intricate parts that may pose a choking hazard. Keep out of reach of children and pets. Recommended for ages 14 and up. When assembling, you should not stand directly underneath the 3D printed parts. When placing them on the wall, you should be at least 18 inches away from the wall to prevent the model from falling on you. Models may contain sharp and pointy parts, such as ribs, teeth, and claws. Use safety glasses, gloves, long sleeves, and proper footwear when assembling. Avoid placing models in high-traffic areas, such as hallways, or areas where people walk directly underneath. Do not place them behind couches or other seating areas where falls could cause injury. The creator assumes no responsibility for injuries or damages resulting from the use or misuse of these models. This includes damage to property, such as televisions or other items, that may occur if the model falls. During assembly, 3D printed parts should be placed in a box or out of the way to avoid tripping hazards. SparkPrinting3D will not be held responsible or liable for any damages or injuries occurring during the assembly process.

Agreement and Liability Disclaimer

By purchasing and using these files, you agree to the following terms:

You understand and acknowledge that SparkPrinting3D is not responsible for any injuries, damages, or losses that may occur from the use or misuse of this file or the resulting 3D printed product.

You assume full responsibility for the safe handling, assembly, and use of the product.

Terms of Use: Non-Commercial Use Only

You are free to use these 3D printable files for personal, non-commercial purposes only.

Prohibition on Use in Machine Learning and AI: These files may not be used in any machine learning or AI programs for training or any other purpose.

No Modifications: You may not modify, adapt, or create derivative works from these files.

No Distribution or Sharing: You may not distribute, share, or make these files available to others in any form.

Social Media Use:

You are allowed to share pictures and videos of your 3D printed creations on social media. However, sharing the files themselves is strictly prohibited.

These terms can change at any time at the discretion of SparkPrinting3D. It’s best to check the Discord server to see any new terms of use.

You will need to read the Agreement, Liability Disclaimer, and Commercial Use Terms. By purchasing this, you agree to the terms.

You will get access to my Discord server, assembly guides, the ability to vote on future projects, working loyalty rewards on Discord, and fast support on Discord if models have problems or questions. Additionally, with the starter pack, you will receive 22 files. These include:

Four different bed sizes for dinosaur feet—T-Rex, Raptor, and Spinosaurus—totaling 12 files.

A wall mount skull for the T-Rex in two sizes for the 220mm bed.

Two sizes of Raptor skulls, plus name plates and backboards for both Raptor and T-Rex. These can also be mounted on PC cases.

Each month, you will receive 1 to 2 new large dinosaur wall mounts. For each dinosaur, you will get the large 220mm bed size version, which prints in sections. The final size of the large model will vary based on the anatomy of the dinosaur but is estimated to be between 4 to 5 feet (1200mm to 1500mm) from head to tail. Additionally, you will receive small and mid-size versions for 220mm, 300mm, and 400mm printer beds. The small versions fit as one piece on the printer, and the mid-size versions come in two sections, approximately double the size of the print bed used. You will also receive 1 to 2 new mount skulls for PC mods and wall mounts. These have the same mounting holes, so they can be used for either purpose. In total, you will receive 5 to 10 new models each month.

All large 220mm bed size versions will be in rotation. October will feature the large 220mm bed size Raptor, which reaches 51 inches (1295mm) long, and the Brachiosaurus, which is about 5 feet (1500mm) long.

NOTE: Rotation is only for large 220mm bed versions. The 300mm, 400mm, and 800mm versions will be available for purchase in my store.

Safety and Usage Disclaimer

These 3D printed models are not toys and are not intended for children. Choking Hazard: The models contain small, intricate parts that may pose a choking hazard. Keep out of reach of children and pets. Recommended for ages 14 and up. When assembling, you should not stand directly underneath the 3D printed parts. When placing them on the wall, you should be at least 18 inches away from the wall to prevent the model from falling on you. Models may contain sharp and pointy parts, such as ribs, teeth, and claws. Use safety glasses, gloves, long sleeves, and proper footwear when assembling. Avoid placing models in high-traffic areas, such as hallways, or areas where people walk directly underneath. Do not place them behind couches or other seating areas where falls could cause injury. The creator assumes no responsibility for injuries or damages resulting from the use or misuse of these models. This includes damage to property, such as televisions or other items, that may occur if the model falls. During assembly, 3D printed parts should be placed in a box or out of the way to avoid tripping hazards. SparkPrinting3D will not be held responsible or liable for any damages or injuries occurring during the assembly process.

Agreement and Liability Disclaimer

By purchasing and using these files, you agree to the following terms:

You understand and acknowledge that SparkPrinting3D is not responsible for any injuries, damages, or losses that may occur from the use or misuse of this file or the resulting 3D printed product.

You assume full responsibility for the safe handling, assembly, and use of the product.

Conditions for Commercial Use:

Commercial use is only permitted if you have an active commercial license subscription from SparkPrinting3D.

The licensee is responsible for ensuring that all customers are informed of safety and usage instructions related to these 3D printed products, including providing appropriate safety disclaimers and warnings regarding potential hazards.

The licensor assumes no responsibility for any injuries, damages, or claims arising from the use or misuse of the licensed products by the licensee or their customers.

You are limited to using a maximum of 10 printers for production. Mass manufacturing or large-scale production is strictly prohibited.

Prohibition on Use in Machine Learning and AI:

These files may not be used in any machine learning or AI programs for training or any other purpose.

No Modifications:

You may not modify, adapt, or create derivative works from these files.

No Distribution or Sharing:

You may not distribute, share, or make these files available to others in any form.

Social Media Use:

You are allowed to share pictures and videos of your 3D printed creations on social media. However, sharing the files themselves is strictly prohibited.

3. Changes to Terms:

These terms are subject to change at any time at the discretion of SparkPrinting3D. It is recommended to check the Discord channel for the latest terms of use.

You will need to read the Agreement, Liability Disclaimer, and Commercial Use Terms. By purchasing this, you agree to the terms.

You will get access to my Discord server, assembly guides, the ability to vote on future projects, working loyalty rewards on Discord, and fast support on Discord if models have problems or questions. Additionally, with the starter pack, you will receive 22 files. These include:

Four different bed sizes for dinosaur feet—T-Rex, Raptor, and Spinosaurus—totaling 12 files.

A wall mount skull for the T-Rex in two sizes for the 220mm bed.

Two sizes of Raptor skulls, plus name plates and backboards for both Raptor and T-Rex. These can also be mounted on PC cases.

Each month, you will receive 1 to 2 new large dinosaur wall mounts. For each dinosaur, you will get the large 220mm bed size version, which prints in sections. The final size of the large model will vary based on the anatomy of the dinosaur but is estimated to be between 4 to 5 feet (1200mm to 1500mm) from head to tail. Additionally, you will receive small and mid-size versions for 220mm, 300mm, and 400mm printer beds. The small versions fit as one piece on the printer, and the mid-size versions come in two sections, approximately double the size of the print bed used. You will also receive 1 to 2 new mount skulls for PC mods and wall mounts. These have the same mounting holes, so they can be used for either purpose. In total, you will receive 5 to 10 new models each month.

All large 220mm bed size versions will be in rotation. October will feature the large 220mm bed size Raptor, which reaches 51 inches (1295mm) long, and the Brachiosaurus, which is about 5 feet (1500mm) long.

NOTE: Rotation is only for large 220mm bed versions. The 300mm, 400mm, and 800mm versions will be available for purchase in my store.

Safety and Usage Disclaimer

These 3D printed models are not toys and are not intended for children. Choking Hazard: The models contain small, intricate parts that may pose a choking hazard. Keep out of reach of children and pets. Recommended for ages 14 and up. When assembling, you should not stand directly underneath the 3D printed parts. When placing them on the wall, you should be at least 18 inches away from the wall to prevent the model from falling on you. Models may contain sharp and pointy parts, such as ribs, teeth, and claws. Use safety glasses, gloves, long sleeves, and proper footwear when assembling. Avoid placing models in high-traffic areas, such as hallways, or areas where people walk directly underneath. Do not place them behind couches or other seating areas where falls could cause injury. The creator assumes no responsibility for injuries or damages resulting from the use or misuse of these models. This includes damage to property, such as televisions or other items, that may occur if the model falls. During assembly, 3D printed parts should be placed in a box or out of the way to avoid tripping hazards. SparkPrinting3D will not be held responsible or liable for any damages or injuries occurring during the assembly process.

Agreement and Liability Disclaimer

By purchasing and using these files, you agree to the following terms:

You understand and acknowledge that SparkPrinting3D is not responsible for any injuries, damages, or losses that may occur from the use or misuse of this file or the resulting 3D printed product.

You assume full responsibility for the safe handling, assembly, and use of the product.

Conditions for Commercial Use:

Commercial use is only permitted if you have an active commercial license subscription from SparkPrinting3D.

The licensee is responsible for ensuring that all customers are informed of safety and usage instructions related to these 3D printed products, including providing appropriate safety disclaimers and warnings regarding potential hazards.

The licensor assumes no responsibility for any injuries, damages, or claims arising from the use or misuse of the licensed products by the licensee or their customers.

You are limited to using a maximum of 10 printers for production. Mass manufacturing or large-scale production is strictly prohibited.

Prohibition on Use in Machine Learning and AI:

These files may not be used in any machine learning or AI programs for training or any other purpose.

No Modifications:

You may not modify, adapt, or create derivative works from these files.

No Distribution or Sharing:

You may not distribute, share, or make these files available to others in any form.

Social Media Use:

You are allowed to share pictures and videos of your 3D printed creations on social media. However, sharing the files themselves is strictly prohibited.

3. Changes to Terms:

These terms are subject to change at any time at the discretion of SparkPrinting3D. It is recommended to check the Discord channel for the latest terms of use.