Simple no frills Apple Watch SE Band Loop fix. I made this to fix the loop on my wifes Apple Watch SE.

Apple Watch SE Band Loop Fix

Watch Loop Repair.3mf

As with all of my projects, I wasn't completely happy with the other solutions. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should also work with other brands. In this version, I have reworked the sides and added a tray up top to save space on your desk.

NEEDED HARDWARE
4 - M4-0.7 x12mm Flat Head Screws

3D PRINTING SETTINGS
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

The roller should be the only part that needs support. The other parts, make sure they lay flat.

MUNBYN LABEL HOLDER V2

As with all of my projects, I wasn't completely happy with the other solutions. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should also work with other brands. In this version, I have reworked the sides and added a tray up top to save space on your desk.

**NEEDED HARDWARE**
4 - M4-0.7 x12mm Flat Head Screws

**3D PRINTING SETTINGS**
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.

Lower Tray.stl

This Husky was created using Stable Diffusion.

The dimensions are 150x150

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA+ Sunlu Silver Transmission Distance: 2
	PLA PolyTerra Cotton White Transmission Distance: 2.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #11 (0.56mm) swap to Grey
	At layer #22 (1mm) swap to Silver
	At layer #33 (1.44mm) swap to Cotton White
	At layer #39 (1.68mm) swap to White for the rest.


Husky (HueForge)

Designed as a companion piece for the Cybernetic Woman

150x150 in Size

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Black Transmission Distance: 0.3
	PLA+ IIIDMax Navy Blue Transmission Distance: 6
	PLA+ IIIDMax Mystic Purple Transmission Distance: 6
	PLA PolyLite Pro Yellow Transmission Distance: 11
	PLA+ IIIDMax Light Blue Transmission Distance: 4
	PLA+ IIIDMax Light Pink Transmission Distance: 8
	PLA+ IIIDMax Baby Blue Transmission Distance: 11
	PLA PolyLite Natural Transmission Distance: 21

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Navy Blue
	At layer #9 (0.8mm) swap to Mystic Purple
	At layer #10 (0.88mm) swap to Yellow
	At layer #11 (0.96mm) swap to Light Blue
	At layer #12 (1.04mm) swap to Light Pink
	At layer #14 (1.2mm) swap to Baby Blue
	At layer #18 (1.52mm) swap to Natural for the rest.

Cybernetic Man (Hueforge)

Cybernetic Woman is a masterpiece! I had a lot of fun coloring this one and see how clean it came out.

150x150 size

Project Files Included

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Black Transmission Distance: 0.3
	PLA+ IIIDMax Navy Blue Transmission Distance: 6
	PLA+ IIIDMax Mystic Purple Transmission Distance: 6
	PLA PolyLite Pro Yellow Transmission Distance: 11
	PLA+ IIIDMax Light Blue Transmission Distance: 4
	PLA+ IIIDMax Light Pink Transmission Distance: 8
	PLA+ IIIDMax Baby Blue Transmission Distance: 11
	PLA PolyLite Natural Transmission Distance: 21

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Navy Blue
	At layer #9 (0.8mm) swap to Mystic Purple
	At layer #10 (0.88mm) swap to Yellow
	At layer #11 (0.96mm) swap to Light Blue
	At layer #12 (1.04mm) swap to Light Pink
	At layer #14 (1.2mm) swap to Baby Blue
	At layer #18 (1.52mm) swap to Natural for the rest.

Cybernetic Woman(Hueforge)

Cybernetic Woman

I was originally going to release this around halloween but decided to release early.

150x150

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

Filaments Used:
	PLA PolyLite Black Transmission Distance: 0.3
	PLA PolyLite Pro Blue-Green Transmission Distance: 0.5
	PLA PolyLite Yellow Transmission Distance: 11
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
	Start with Black
	At layer #5 (0.6mm) swap to Blue-Green
	At layer #8 (0.9mm) swap to Yellow
	At layer #10 (1.1mm) swap to Natural
	At layer #24 (2.5mm) swap to Cotton White for the rest.

The model is not as tall as your last slider.  Consider checking the Full Range button or change your Depth Mode.


Spooky House (HueForge)

Demon Lady is something I thought up while thinking of cool stuff to decorate my house with. She looks like a force to be reckoned with.

150x150 in Size

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA+ IIIDMax Mystic Purple Transmission Distance: 3.4
	PLA+ IIIDMax Light Blue Transmission Distance: 5
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Charcoal Black until layer #7 at 0.8mm
	Dark Blue until layer #8 at 0.9mm
	Mystic Purple until layer #11 at 1.2mm
	Light Blue until layer #13 at 1.4mm
	Natural until layer #21 at 2.2mm
	White for the rest.

Demon Lady (Hueforge)

Demon Lady

Man In Dream Realm really sets a calming magical feeling. The blending came out so awesome.

150x150 in Size

3D Print Settings
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Army Blue Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Aqua Blue Transmission Distance: 2.5
	PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
	Charcoal Black until layer #4 at 0.5mm
	Army Blue until layer #5 at 0.6mm
	Natural until layer #16 at 1.7mm
	Aqua Blue until layer #17 at 1.8mm
	White for the rest.

Man In Dream Realm (Hueforge)

Man In Dream Realm

As with all of my projects, I wasn't completely happy with the other solutions out there. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should work with other brands as well.

NEEDED HARDWARE
4 - M4-0.7 x12mm Flat Head Screws

UPDATE 5-15-23
Added sides that hold a 608zz bearing. This was requested, so I am adding them to the project.
Added Tray v2 to allow longer M4-0.7 Flat head screw.
Added Tolerance print for the bearing side to see if your bearings will fit before you print the entire side.
UPDATE 5-16-23
Added second roller that fits the inside of the bearings tighter
Updated the bearing sides for the new roller
WHAT'S IN THE DOWNLOAD
Tray (12mm screw)
Tray v2 (Any length works. I wouldn't go over 16mm)
Side 1
Side 2
Side 1 that fits a 608zz bearing
Side 2 that fits a 608zz bearing
Roller
Roller that fits bearings tighter
You need 2 sides, a roller, a tray, and 4 screws to build. If you choose the bearing sides, then you need 2 608zz bearings. The files are clearly marked for which are for use with bearings.

3D PRINTING SETTINGS
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.

MUNBYN LABEL HOLDER

Munbyn Label Holder.3mf

Image of a man walking into the light. The light on this print is truly amazing.

Design is 150x150

.stl included without color changes.

Project files for HueForge also come with download.

3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Natural Transmission Distance: 21
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Charcoal Black until layer #7 at 0.8mm
Yellow until layer #11 at 1.2mm
Natural until layer #11 at 1.2mm
Sunrise Orange until layer #14 at 1.5mm
White for the rest.

MAN WALKING INTO THE LIGHT (Hueforge)

MAN WALKING INTO THE LIGHT (HUEFORGE)

Generated an image of a Dalek via AI and painted in Hueforge. The project came out very cool and has a nice color combo that stands out. This would look great on any Whovians wall.

Design is 200x200
.3mf file included with color changes.

.stl included without color changes.

Project files for HueForge also come with download.

3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm. I printed with 0.08 and a base of 0.16.

Filaments Used:
PolyTerra Charcoal Black Transmission Distance: 0.3
PolyLite Dark Blue Transmission Distance: 0.5
Default White Transmission Distance: 5
PolyLite Pro Light Blue Transmission Distance: 1
PolyTerra Army Red Transmission Distance: 0.3
PolyLite Pro Yellow Transmission Distance: 11

Swap Instructions:
Charcoal Black until layer #4 at 0.5mms
Dark Blue until layer #5 at 0.6mms
White until layer #8 at 0.9mms
Light Blue until layer #12 at 1.3mms
Army Red until layer #15 at 1.6mms
Yellow until layer #25 at 2.6mms

Dalek Painting (Hueforge)

Dalek HueForge Painting

3D MODEL DESCRIPTION
I wasn't satisfied with the guides that other designers put out there for their Samla boxes. I decided to make my own. These were designed with the Capricorn XS tubing in mind.

Needed: Everbilt Grommet 3/4in (1+). I am running a 22L Samla box so I can fit three roles. I bought 3 of these.

Included is what I called the oopsie adapter. If you accidently cut your wholes too big in your box, it may help save the project. I know it did for me.

Releasing free for a limited time.

3D PRINTING SETTINGS
Layer Height: 0.2mm
Print Speed: 60mm/s
Filament: Whatever (I used PLA Pro from Overture)

SAMLA BOWDEN FILAMENT GUIDE

Samla Box Filament Guide - Print Together.3mf

3D MODEL DESCRIPTION
I whipped this up after downloading another knob that needed the original Ender 3 knob glued to it. I personally rather potentially ruin a printed knob than the one that came with the printer.

3D PRINTING SETTINGS
Print Time: 20-30mins, depending on profile settings and slicer
Layer Height: 0.12mm-0.28mm, this is personal preference for quality.
Nozzle Temp: 200-210c, again this depends on filament used. I used Overture PLA Pro @ 210c
Bed Temp: 60c

Basic Ender 3 Knob

3D MODEL DESCRIPTION
I wasn't satisfied with the other locks out there and how they gripped the wheels to lock them in place. There was still too much movement. I've designed a dual locking system that will keep the wheel lock snug and the wheel in place.

Please note these are for the upgraded Creality wheels and NOT the plastic stock wheels. Also note, the letter on the two clamps have been removed from the final upload. The dual lock also may not work for everyone. Single should work for most.

Free for the first 100 downloads!

3D PRINTING SETTINGS
Layer Height: 0.2mm
Print Speed: 50mm/s
Filament: Whatever (I used PLA from Overture)
Infill: 40%

ENDER WHEEL LOCK V.3

ender wheel lock v3.3mf

3D MODEL DESCRIPTION
I found an already great design that was v-slot mounted and put my spin on it to make it t-nut mount. I did this due to wanting it to be mounted on the read side of the top bar on my Ender and not being able to get the v-slot mount on easily. This should print well as the mounting is based on a design I had done.

3D PRINTING SETTINGS
Filament: PLA Pro, PETG
Temp: PLA Pro: 200-205
Temp: PETG: 235-240
Speed: 50mm

Supports are optional but not needed.

FILAMENT SENSOR SWIVEL MOD

FilamentSensorBody-Remix.stl

I plan to upload 1 to 3 HueForge Paintings a month and at least 1 to 3 functional models.

Basic Plan

Upper Tray.stl

Roller.stl

Side1.stl

Side2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SpannMagoo

Achievements

Seedling

Novice Maker

Voyager

Pinned models

Cybernetic Woman(Hueforge)

Cybernetic Man (Hueforge)

MUNBYN LABEL HOLDER V2

Apple Watch SE Band Loop Fix

MUNBYN LABEL HOLDER V2

Husky (HueForge)

Cybernetic Man (Hueforge)

Cybernetic Woman(Hueforge)

Spooky House (HueForge)

Demon Lady (Hueforge)

Man In Dream Realm (Hueforge)

MUNBYN LABEL HOLDER

MAN WALKING INTO THE LIGHT (Hueforge)

Dalek Painting (Hueforge)

SAMLA BOWDEN FILAMENT GUIDE

Basic Ender 3 Knob

ENDER WHEEL LOCK V.3

FILAMENT SENSOR SWIVEL MOD