SpannMagoo
SpannMagoo

MAN WALKING INTO THE LIGHT (Hueforge)

by
SpannMagoo
SpannMagoo
SpannMagoo
SpannMagoo
|
Image 1 of 3
MAN WALKING INTO THE LIGHT (Hueforge) 3d model
SpannMagoo
SpannMagoo
|
Image 1 of 3
MAN WALKING INTO THE LIGHT (Hueforge) 3d model
2D
3D
Makes
MAN WALKING INTO THE LIGHT (Hueforge) 3d model
MAN WALKING INTO THE LIGHT (Hueforge) 3d model
MAN WALKING INTO THE LIGHT (Hueforge) 3d model

MAN WALKING INTO THE LIGHT (Hueforge)

Image of a man walking into the light. The light on this print is truly amazing.

Design is 150x150

.stl included without color changes.

Project files for HueForge also come with download.

3D PRINTING SETTINGS Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite Natural Transmission Distance: 21 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Charcoal Black until layer #7 at 0.8mm Yellow until layer #11 at 1.2mm Natural until layer #11 at 1.2mm Sunrise Orange until layer #14 at 1.5mm White for the rest.


8 Likes0 DownloadsJuly 17, 2023