tracking pixel
S

5mm nut driver handle (using nut driver from new PC build fixings)

by
Sagittario
Follow
Follow
Remix Model
S
Sagittario
|
Image 1 of 2
5mm nut driver handle (using nut driver from new PC build fixings) 3d model
S
Sagittario
|
Image 1 of 2
5mm nut driver handle (using nut driver from new PC build fixings) 3d model
2D
3D
Makes
5mm nut driver handle (using nut driver from new PC build fixings) 3d model
5mm nut driver handle (using nut driver from new PC build fixings) 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3137212.

This is simply a handle to fit one of the little screwdriver nut adapters you get n some PC case fixing parts.

This will turn it into a nut driver for use in other projects.

Just glue in place in the end, you may need to warm the nut slightly to press it in (not melting hot!)

1.2mm shell 25% infill. Use a brim or raft if needed, it will be relatively small.


0 Likes0 DownloadsDecember 15, 2022


0 Likes0 DownloadsDecember 15, 2022
This model is restricted by licensing terms.